George Brock
2015 920 Pro/XP
2015 Mercury 250 Pro/XS
Twin 8' Powerpole Blades
2013 Phoenix 721 ProXP
Bought nad775 pads as listed above. Not even close to the correct ones! help!!!
These
https://www.pacifictrailers.com/prod...el-set-33008-9
I don’t know what they translate to at your local auto parts store.
2013 Phoenix 721 ProXP
Is the hardware on the trailers metric or standard? Trying to put a travel tool kit together. Thanks
Vault Hub Install Info http://www.drew-tek.com/parts/wp-con...rvice-Info.pdf
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
regarding hardware, i guess the answer would be both. 3/4 deep thin socket for lug nuts, 7 mm allen key for brake pads, standard sockets for calipers. Also don't buy the brake pads from Orielly's, they don't have the arch cut out for the rotor.
the 7 pin connector on your trailer is a 7 pin to 5 pin adaptor that plugs into the trailer. It will slowly stretch then all of the sudden you will realize the cover is dry-rotted and cracking in multiple spots. For most, an easy replacement part every four years. 5 or so it if splitting is OK before you change it.
Exact part at eTrailer.com is A57CCB Description is 7 pole blade to 5 pole flat and length is 94.5
You will need a 3/8oz socket to loosen the retaining screw that holds the cable to trailer.
2024 Phoenix 818
2024 merc 175 pro xs 3B411947
What size grease zerk ? The pdf says 1/16" NPT I dont quite understand that.
How do i tell which PVC adapter I need to find: "Place PVC collar over protector (2"x1-½” slip collar for 1980 size) (2" female adapter for 2328 size"?
Parts list so far:
(I have a grease gun and red locktite)
zerk fitting tbd
pvc tbd
the following from easternmarine:
UFP 'Vault' System Hybrid Lubricant (14 Oz. Cartridge) #07036 Stock #: 5415062
UFP 1.98" Vault Hybrid Oil Bath Bearing Protector #07502 Stock #: 5415063
UFP 1.98" Oil Bath internal Gasket #07516 Stock #: 5415112
UFP 1-3/8" x 1-1/16" Special Cup Trailer Wheel Bearing Kit #7007 Stock #: 5415137
UFP 1.68" ID Vault Oil Seal #32123 Stock #: 5415064
UFP Stainless Steel Spindle Wear Ring 2900 - 3700 lb. Axles #33522 Stock #: 5415009
UFP 3.5K S.S. Wear Ring O-Ring #32736 UFP 3.5K S.S. Wear Ring O-Ring #32736 Stock #: 5415103
Last edited by cobra-drvr; 07-13-2019 at 12:19 PM.
Ok guys i see lot about the back section of the trailer but what about the master cylinder and all that. The front section of the trailer?
So is the caliper the same as one on a Kia Sephia??
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
I cannot for the life of me find 1/16 NPT zerks online that ship to Australia. I have a 2011 marine master on a Phoenix 618 that I need to do the bearings on.
The PDF that says 1/16 grease fitting (Zerk fitting) is incorrect. You need 1/4 x 28 straight grease fittings. I purchased a box of 10 from Tractor Supply yesterday for ~$8 and they fit perfect. *Remember after you service your axle you DO NOT leave the grease fitting in.
that must have to do with the 2 different axle sizes but all of ours should be the same thanks for posting about the size
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Drewtick you know if the 2021 trailers are still the same as far as bearing sizes and hub sizes?
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Thanks!!