Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Apr 2007
    Location
    North Augusta
    Posts
    6

    2006 ETEc starter problem

    the gear on the top of the motor shaft on my starter is broken in two. It is a small gear that turns a biger gear that moves the bendix. i need to find this part. can any one tell me where to find it or if i have to get a whole assembly to get that one gear? i have looked all over the internet and cant find an explosion diagram to get any info from either.

  2. Member
    Join Date
    Apr 2007
    Location
    North Augusta
    Posts
    6
    #2

    Re: 2006 ETEc starter problem (King Of The Hill)

    some one showed me this site but it dont break down to the part that i am needing. the part i need is under the housing for the bendix. any one have any ideas now?
    http://epc.brp.com/Index.aspx?...d3aff

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,139
    #3

    Re: 2006 ETEc starter problem (King Of The Hill)

    You need item #3 of the starter motor assembly. Local BRP dealer can get your one.

Similar Threads

  1. 2006 ETEC HO problem
    By Pole Bender in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 04-19-2011, 09:12 PM
  2. Starter problems w/Etec 225HO?
    By nikldac in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 09-08-2009, 09:29 AM
  3. 2006 etec starter problems
    By BrianD in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 07-26-2009, 12:26 PM
  4. 2006 60HP Etec problem
    By FATALATTRACTION in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 08-27-2008, 04:42 AM
  5. Spark plug problem 2006 75 hp etec
    By kjhough in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 03-04-2006, 05:55 PM