Model # E200FHLSRC 2004
I need to adjust the Idle I think.
The motor is a little hard to start and will die at idle if throttle is not given to 1000-1200rpms. Motor wants to Idle when first started at 400rpms. Give a little throttle for a few seconds and will idle fine at 6-700rpms. Will idle fine in gear with no throttle given. No other issues
Could it be the fuel bulb starting to go bad?
Modified by tpgrealty at 10:12 AM 4/11/2010
Sounds as if you need a good de-carb or new plugs or both! If you are not running XD100 then de-carb and change the plugs.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
+1, It's all computer controlled, you have an underlying problem.
I run xd100. I check the plugs. The plugs only have 56hrs on them though.
You sure can't play with the idle speed/rpms that is set from the plant.Like said before some underlying issues.
Reply With Quote
