Finally got the XP150 finished...except...

[fishinscott]

<U>TE150SLCEM</U>

Okay, big thanks go out to ChampionMan , Gearcaseman , and I'm sure a few others . I finally got everything back together and running. Had it down at the launch yesterday, and she ran like a beauty .

However, I noticed some fuel dripping, and found that the housing on the VRO pump is cracked . Here are a couple of pictures of what I found (not that it really matters):



I realize that the VRO2 pumps are not really considered "rebuildable," but the diaphragms and o-rings, and everything else look great. So my question is, is there any way to get my hands on a new housing?

I know some guys have removed the VRO2 pumps from their motors in favor of premix. Does anyone have one they'd be willing to offload cheap? I've pretty much maxed out the rebuild budget, and would love not to have to spend the money on a whole new VRO2 assembly, if I don't have to.

As always, I appreciate the knowledge and insight which is undoubtedly soon to be bestowed upon me.

[alwayzcocacola06]

sorry not trying to hijack but where did you get any manuals. This is the exact motor I have and was looking to see about getting some manuals

[ChampioNman]

Let me see what I have for a body. You cannot move the oiler portion but the middle part is ok!

[fishinscott]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by alwayzcocacola06 &raquo;</TD></TR><TR><TD CLASS="quote">sorry not trying to hijack but where did you get any manuals. This is the exact motor I have and was looking to see about getting some manuals</TD></TR></TABLE>

Ken Cook Company is the only source I know of.

http://www.outboardbooks.com/i...71708

You'll need manual number <U>507757</U>. It's a factory manual, and well worth the money. You'll also find a very helpful parts breakdown at shop.evinrude.com on the electronic parts catalog. I think it's the best parts website I've ever seen.

http://shop2.evinrude.com/ext/...9839c

Your best resource, however, is definitely this board!! I broke the crankshaft in mine, and I just fired it up for the first time this weekend, thanks to ChampionMan and the other fine moderators and contributors on this board.


Good luck!!

[fishinscott]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Let me see what I have for a body. You cannot move the oiler portion but the middle part is ok! </TD></TR></TABLE>

Okay, thanks Fred.

[stratos284]

Ive got a body with a bad diaphram off a 94 150 intruder if it will fit let me know and I'll get it to ya.

[ChampioNman]

Ship it!!

[fishinscott]

That sounds excellent, Phil. It got the thumbs up from ChampionMan, so it must be good!! I sent you an IM.

Thanks!!

[fishinscott]

Well, Stratos284 checked out his VRO pump, and the housing has a couple of cracks in it. Anyone else have one sitting in the scrap pile?

Thanks for checking yours out, Phil. At least you know you can throw it away now!

[ChampioNman]

Pretty sure I have one shoot me your home addy via e-mail and I'll get it out to you.

[fishinscott]

Thanks Fred, will do!

[ChampioNman]

Hey Scott, sorry for the delay,,,, Complete VRO went out today via USPS priority mail should be out your way by Thursday. Have fun it ain't new but it is a 4 wire and the housing is intact. Merry Christmas!!

[fishinscott]

Sorry for the delay? Are you kidding me???

You are truly a class act, Fred

Hopefully my next post will be a link to a video of my 'rude blazing down the lake!! I know DoferGofer is just dying to see that

You have yourself a Merry Christmas, and stay warm!

[Bassmeister]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fishinscott &raquo;</TD></TR><TR><TD CLASS="quote">Sorry for the delay? Are you kidding me???

You are truly a class act, Fred

Hopefully my next post will be a link to a video of my 'rude blazing down the lake!! I know DoferGofer is just dying to see that

You have yourself a Merry Christmas, and stay warm!

</TD></TR></TABLE>
That's just one of the MANY reasons I call him my friend!!!

[KCLOST]

What an awesome group of people we have here... Good job to you guys....

[GhostComanche]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassmeister &raquo;</TD></TR><TR><TD CLASS="quote">
That's just one of the MANY reasons I call him my friend!!! </TD></TR></TABLE>

None finer than ole' Freddy !!!!!................ .........................Roger

[ChampioNman]

He ain't hooked it up yet!! Should work better than what he had though! Just glad I could help our a fellow BBC'r.

[fishinscott]

Ruh-roh

[Bassmeister]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fishinscott &raquo;</TD></TR><TR><TD CLASS="quote">Ruh-roh

</TD></TR></TABLE>
It'll be fine, or he wouldn't have sent it!!

[fishinscott]

Got it in the mail yesterday. Crack free!!!

I'll mount the oil side up to it hopefully tonight, and should be gettin 'er all mounted up this weekend. A few and a break in the winter storm, and we'll go out for a test run

Fred yer da bomb!!