Thread: Need Help

Results 1 to 8 of 8
  1. #1
    anthony horton fishing bass angler anthony's Avatar
    Join Date
    Nov 2016
    Location
    Greenville NC
    Posts
    239

    Praying Need Help

    Here recently my 2007 yamaha 3 cylinder 2 stroke 70 has been giving me issues. It started making a really loud banging metal sound when under pressure and in gear. the faster i go the louder and faster the sound is. in neutral the sound goes away. when trailered and i put the muffs on there is no sound either. this just started happeneing in the last two trips i was on. i will be draining the oil and pulling the lower unit but am asking if anyone has an idea on what it could be as this has never happened before.
    Anthony Horton Fishing
    Facebook: Bass Angler Anthony Horton
    Instagram: Angler Spanky
    Website: Ncbasschampions.com
    Email: mail.ncbasschampions.com
    ncbasschamps@outlook.com
    aedynsdaddy@hotmail.com

  2. Banned
    Join Date
    Nov 2010
    Location
    The 'Boro
    Posts
    6,175
    #2
    Sounds like the lower unit is shot if it only does it in gear. Time to call Junior at pitstop.

  3. Member
    Join Date
    Mar 2013
    Location
    rocky mount nc
    Posts
    71
    #3
    My 225 merc did the same thing a few years ago, blown lower, hopefully yours is alot cheaper, 3 feet of fishing line did $2000 worth of damage

  4. Member
    Join Date
    Apr 2009
    Location
    Roanoke Rapids, NC
    Posts
    3,455
    #4
    Lower unit. Don't run it any more or you risk punching a hole in housing and ruining it if you haven't already

  5. Member
    Join Date
    Nov 2017
    Location
    Cary, NC
    Posts
    32
    #5
    sounds like a broken gear. went through this a couple weeks ago. drain the oil and look for small metal flake.

    In my case, insurance covered the repair, i stated water intruded from a damaged seal from fishing line and caused the failure.

  6. anthony horton fishing bass angler anthony's Avatar
    Join Date
    Nov 2016
    Location
    Greenville NC
    Posts
    239
    #6
    i pulled the lower unit today so far nothing i can tell i will be draining the oil tomorrow
    Anthony Horton Fishing
    Facebook: Bass Angler Anthony Horton
    Instagram: Angler Spanky
    Website: Ncbasschampions.com
    Email: mail.ncbasschampions.com
    ncbasschamps@outlook.com
    aedynsdaddy@hotmail.com

  7. anthony horton fishing bass angler anthony's Avatar
    Join Date
    Nov 2016
    Location
    Greenville NC
    Posts
    239
    #7
    Looks like i need a new lower, drained the oil and have metal shavings on the magnet as well as the oil looks like moon dust
    Anthony Horton Fishing
    Facebook: Bass Angler Anthony Horton
    Instagram: Angler Spanky
    Website: Ncbasschampions.com
    Email: mail.ncbasschampions.com
    ncbasschamps@outlook.com
    aedynsdaddy@hotmail.com

  8. Member
    Join Date
    Sep 2011
    Location
    Snow Hill, NC
    Posts
    577
    #8
    Check with buckhorn boat doc in Wilson
    -Lance
    Bullet 21XD Mercury 250 Pro XS


Tags for this Thread