Is this the right oil tank and kit for my engine

[ril0]

Hi i have evinrude 200hp Ficht year 2000 and have found an oil tank part number 0177284 is this the correct one for my engine.
Thanks in anticipation. '


Modified by ril0 at 10:54 AM 9/28/2009

[Danrude]

Yes! That will work with the DI motors as well as the E-Tec's.

[ril0]

thanks danrude thats great news .btw is there a return pipe to tank or does it return to pre pump oil circuit ?

[Danrude]

There is a line running from the lift pump to the oil injector and then one from the injector to a pressure regulator then out to the oil tank. the pressure regulator must be in the return line to build up the proper amount of pressure.

[ril0]

Danrude on the above mentioned oil tank looking at the pics on ebay there only seems to be a single pipe is this correct if so where do I connect the pipe on my engine labeled oil return or do I just get a suitable length of pipe and run it back to tank using a suitable connector .

[Danrude]

Follow this link it will show where the return line goes into the tank. http://12.2.215.22/pub/default...ds=EJ change it from evinrude to accessories and look under 2007 model year.
The fitting may be capped off so remove it then get a piece of oil line long enough to reach from the motor to the tank and hook it up.

[ril0]

Thanks Dan got that, now will order tank maybe can get this thing started, i might not need to connect to laptop if she runs ok