Got a 5 port switch and 2 onix 8's 2 onix 10's and old faithful 898 si hooked to it.
Now what do i do after I turn all units on? Im ok with tech stuff but not great. Got full.size hd ducer at transom hooked with thru hull and to one 10 at the console. Other 10 is just hooked to switch Got one 8 at the front hooked to hd full.size diced and 898 to puck
Got other 8 just hooked to.switxh
2017 BCB Eyra
250 Pro XS
Contemplating a 300R
Serenity is falling asleep in the boat while getting a bite
Big Bear Fishing Rods
Not sure what your asking? If you have the hub powered, and all units connected to the hub, you should be good to go.
2019 Basscat Caracal
225 Evinrude G2
Xplore 12’s
Mega Live 2
36V Ultrex
You will need to go to Network setup on each unit. Good idea to name each unit there then you select which transducer, GPS, etc you want to use. So if transducer is direct connected to console 10 and that is view you want on bow unit then select the console 10 in you bow unit network set up. BUT.. The source unit has to be powered on.
Reply With Quote