help trim problems 225ho

[ob1]

I have a 2005 that has no trim i had down only and when i trimed up it stayed on continuously to the top. Pulled out the two cellenoids and unplugged the blue and green wire and it reset itself. I could still go down but I could only go up and it could still stay on continuously up. Now I have nothing. I remove the cellenoids and put them in and on the down switch I get a ticking from the cellenoid. When I push up, the up cellenoid ticks once, and once only. Any help would be appreciated. My model number is E225FHLSOB and it's a 2005 225 HO with a serial number 05080199. Thanks.

[ChampioNman]

Bad trim switch somewhere in the system.

[ob1]

so if i disconect all of them and hook one up, then one out of the three should work
i will try that thanx

[ob1]

switches OK changed celinoid and now both click when up and down are pressed. powered up the blue and grounded the green and motor seemed to work didnt want to for to long.

[DOUGMCGEEFTD]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Bad trim switch somewhere in the system. </TD></TR></TABLE>
+1 there is a bad switch some where on the boat