Performance Question

[Blue Steel]

Stroker rigged with a 250 Pro Xs torquemaster lower.What could one expect speed wise?

[21XDC]

Blow out

[Gamblurr man]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by 21XDC &raquo;</td></tr><tr><td class="quote">Blow out </td></tr></table> Yup,,Kurt said even a coned torquemaster would blow out in the low 90's,,,, That big skeg on a sportmaster holds it I'm just starting to tap on the 90 mark with all gear in the boat

[Matt Mc]

I'm not sure if you could even run a tqmaster with a 200.

[esdbass]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Gamblurr man &raquo;</td></tr><tr><td class="quote"> Yup,,Kurt said even a coned torquemaster would blow out in the low 90's,,,, That big skeg on a sportmaster holds it I'm just starting to tap on the 90 mark with all gear in the boat</td></tr></table>

Kurt is right with a trolling motor on the bow it will indeed blow out in the low 90's.

[fishin fever]

i ran my 250 pro xs with a torquemaster with the top 4 holes plugged, 8" jackplate only, 36v troller, tons of tackle, 2 power poles 2 people 82-83gps with a 30 bravo worked

[blair]

When I first got Blackie she was rigged with a stock 2008 250xs and stock TM lower.

Ran her easily to 90 with a load anytime, at 92 she would start to "crab", and I blew out at 93 a couple of times.

The Stroker is very forgiving and after would just sit right down.

The setup is good to 90+, anything more you need a modded LU or a sporty.

[Blue Steel]

Thanx for the info, I figured the same. I was looking at one for sale here on BBC.

[blair]