Where can I find them at?
Where can I find them at?
21 ft Stroker / 300 Yamaha with Hydrotech sportsmaster
Any pics?? I was thinking of going the same route!
Mitch I will shoot some before and afters when I do mine.... I assume you have the wood grain like mine..... I have a set at the shop just trying to find time to get them installed.... I'm gonna have to do something with the switch panel though... Hydrotec dash pieces don't have that switch panel that's built into the original Stroker wood grain pieces!!!
Jason
After talking to Wayne I'm going to order the stuff and make my own I guess. Apparently there are some inconsistants between boats. So they will have to be cut to fit each boat.
I was planning on doing actual carbon fiber but that would cost about $500 buck for the sheets.
This stuff is abs plastic with a finished print on it. Just like what comes on it.
21 ft Stroker / 300 Yamaha with Hydrotech sportsmaster
do you have the original woodgrain panels?if so i can coat them in carbon fiber (any color base red,blue,black,purple ect ect)or derectional kevlar look or many other prints including straight,burl,birdseye woodgrains also skull prints,camo and many others. IM me for web site info its hydrographics same process used to do original oem woodgrain dashes and camo guns.they can be cleare in hi gloss,semi or dead flat.and as durableas the finish on yer truck
My dash panels are silver colored kinda like a metal finish... pretty sure they are the original panels though..
21 ft Stroker / 300 Yamaha with Hydrotech sportsmaster
really doesnt matter what color they are i can coat them if you have the panels.
Water transfer is the real deal!! I hope to look into it in the future myself!! But it works good and gets a clear on top of it for protection..
lou,ive been doin it for a couple years.the patterns(prints)are just about endless more than u can imagine.ive put everthing from skulls on harley helments to camo on guns.custom color carbon fiber would look good on dashes the print is silver and clear and the color shows thru the clear so it can be done in any color!as well as traditional fiber look.its pretty amazing to watch it done the first time u see it.dashes like in ur guys strokers including bow panel and switch panel would be 75bucks plus shipping.100 with pass console.for bbc guys
Matt,send me ur peices give me a color i will coat them in carbon fiber and send them back to ya.If you dont like em i wont charge ya!i am willing to do this one time to get these guys exposure to this process!if ya like em and i know you will is why im giving you this deal send me a check when ya get them back.u can call me at 502-338-8203 Bill p.s it will take me a week to get them mailed back to ya once i receive them.
William Just sent you an IM....Lets see what we can do!!!!
I want to challenge you as well....I have a couple of ideas that will take this to the next level as well!!!!
Reply With Quote
