A yamaha will save you the cost and labor of re-ringing after each 100 hrs of use... Plus carry the loads of whatever you throw at it.
A yamaha will save you the cost and labor of re-ringing after each 100 hrs of use... Plus carry the loads of whatever you throw at it.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
My tree hunnert has phase 3 and 5 yr warranty. Select your dealer wisely, you'll be fine
http://www.candomarine.com/Page354.htm
"Only Member of the EvoZilla Fishing Team"
(Applications being considered)
------Co-founder of Post Derailment, LLC---------
One thing no one has mentioned is you still have to convert to a sportsmaster lower unit to realize the potential speeds. That cost a few G's more.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Mike, if thats the case, why do the fast ones have the SM with 1.62 gears. If your considering a change, I have learned to do it right the first time with all the goodies. I held back on my Stroker and put my 67# tm on it when I really wanted the new 82#. I still have the 67#, it won't get replaced until it is unfixable. Just my opinion.
The HydroTec Modified HPDI lower unit is very capable and safe at speeds over 100mph. The motor for sale on fastbass was on a Stroker and that boat reached speeds over 100mph and could fish all day with two people and tourney load at speeds over 90mph. Wayne and the boys have built a very good lower unit and it does well on the boats. If at a point in the future you have the coin for the Sportmaster then do it then but the HPDI will work just fine for now. Just call Wayne he will tell you straight with no Bull Poop. He is an honest business man that prides himself on Customer Service and doing the right thing.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by craigs06 »</TD></TR><TR><TD CLASS="quote">My tree hunnert has phase 3 and 5 yr warranty. Select your dealer wisely, you'll be fine
http://www.candomarine.com/Page354.htm</TD></TR></TABLE>Thats hard to beat, if its not too nosy what is your total investment?
"Only Member of the EvoZilla Fishing Team"
(Applications being considered)
------Co-founder of Post Derailment, LLC---------
I'd like to add that the Yamaha lower unit can also for a few hundred dollars be modified by Titus Grisham and here's that case running on a 3.1 Hydro Tec Phase III that ran all day with two in the boat @ 106
Get with Wayne and Matt at Hydro Tec and you won't go wrong! Don't forget they also have done Hi Perf Merc work for champion Champ boat teams and other Merc Hi perf stuff.
Nope..but C/O does.Its the dealer that will hook you up..what Mods..
Fear-This
2000 202 pro v / 04 250 Hpdi 27 T1 Work
15" Rapid jack 1 1/2 inch below Pad
Tourney Loaded Wot 80.6 gps
Light 83.9 gps
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by craigs06 »</TD></TR><TR><TD CLASS="quote">IM sent. shhhhh!</TD></TR></TABLE>That boat should run in the 90...
Fear-This
2000 202 pro v / 04 250 Hpdi 27 T1 Work
15" Rapid jack 1 1/2 inch below Pad
Tourney Loaded Wot 80.6 gps
Light 83.9 gps
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HOMERUN »</TD></TR><TR><TD CLASS="quote">I know the modified Hammers run strong, but does Yamaha turn anything out of the factory that will run with a stock Merc 260, 280ros, 300 drag, or 300x?</TD></TR></TABLE>
I know the Stroker hull really responds well to horsepower, But does the Norris Craft like High horsepower big block power? or do they only run with a merc racing engine that is no longer available with any waranty
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STROKEDYAMAHA »</TD></TR><TR><TD CLASS="quote">
But does the Norris Craft like High horsepower big block power? or do they only run with a merc racing engine that is no longer available with any waranty
Dang
Modified by Darth VMAX at 9:05 AM 12/21/2009
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STROKEDYAMAHA »</TD></TR><TR><TD CLASS="quote">
I know the Stroker hull really responds well to horsepower, But does the Norris Craft like High horsepower big block power? or do they only run with a merc racing engine that is no longer available with any waranty
Modified by HOMERUN at 9:31 AM 12/21/2009
Modified by Darth VMAX at 9:05 AM 12/21/2009
Modified by Darth VMAX at 9:10 AM 12/21/2009
Modified by Darth VMAX at 10:21 AM 12/21/2009
While a Norris Craft XLVEE hull is faster than the cookie cutters, I don't think it will run with the big three. A stroker/ HT 370hp interest me but no one will tell me what they cost. Also a NC is a handfull above 80gps
.jpg)
Reply With Quote
