Need some help with prop selection

[drcrankenstein]

Alright guys I just joined the stratos family and need some help. I bought a 2003 201 XL Pro w/250 OX66 yammie on it. The prop is a boogered up so I'm in the market for a new one. I've had it out a couple of times and at WOT turning 5900 rpms, and running a hair over 70 (gps). I have a 27 TXP on it now but like I said it's got some pretty bad dings in it. What are some of you guys running on the same set up? Where should I start? All info is welcomed. I made a similar post in the yamaha section but it got buried pretty quick so I thought I'd try it here.

[Hair Jig]

Judging by those numbers, I'd just send the prop out to be repaired and save the rest of the money. Not too bad for a 201.

[Stratos 200]

I have a friend with a 2004 201 with the same motor running a 27t1 with a top speed around 76. If I ain't mistaken this prop came on his boat when bought new. Hope this helps a little. Not sure about rpm or motor height

[201pro]

Same combo and I run a 27T1 or a 27 Tempest. Both run about the same speeds. Avg 76-78 gps light and 74-76 loaded. Mark Croxton on the props board can fix you up. Prop shaft is between 3 1/2 to 2 3/4" below pad depending on load. I have a hyd. plate so I can adjust accordingly.