removing x125 depth finder from 201

[BrianD]

Looking for any direction on removing a x125 depth finder from the front of a 2005 201. Any help before I attempt it would be appreciated.

Thanks,

Brian

[smith64a]

Hey Brian,
its real easy..you will have to take the whole black section off though!
1st: take off the 2 screws at each end of the black cover.
2nd: remove the two grey switch plates
3rd: you will find two long screws (one on each side) inder these plates, remove them.
4th: lift entire black panel up and you will have full access to remove the DF

NOTE: when replacing the grey switch panels be careful not to over tighten the screws as the panels crack easy!!

Hope this helps




Modified by smith64a at 8:48 PM 4/24/2011