Results 1 to 16 of 16
  1. #1
    Member DonnieG's Avatar
    Join Date
    Mar 2006
    Location
    Grahams Forge, VA
    Posts
    2,113

    PS-21 Short Video 1-25-2017

    I could see my 1/8th jig at 20' and sometimes 25'..I think that is pretty good for a jig that light. Todd gave me a couple settings to try which improved my images quite a bit. Still working on it but I am liking the PS-21 much better.



  2. Member
    Join Date
    Jan 2011
    Location
    LaGrange,NY
    Posts
    1,136
    #2
    Can you share the settings you had it on?

  3. Member DonnieG's Avatar
    Join Date
    Mar 2006
    Location
    Grahams Forge, VA
    Posts
    2,113
    #3
    Gain-Auto Medium
    Forward Range-50-60 feet
    Depth-Auto
    Noise Reject-Medium
    Trails-Medium but I think I will go down a notch-too much purple at times.

  4. Member
    Join Date
    Jan 2017
    Location
    Michigan
    Posts
    33
    #4
    Looks like a lot of distortion to me, is it on a trolling motor or stick?

  5. Member
    Join Date
    May 2013
    Location
    Washington State
    Posts
    3,357
    #5
    Donnie, is that a replacement for you first one?

    I think that pretty good for that small a jig. I prefer trails off. They just clutter up the screen I think. Its pretty easy to tell when a target is moving and what direction its going without leaving a trail behind.
    Smokercraft Phantom 202 Yamaha F115/Merc 9.9
    Garmin 7610xsv/GT51M-TM/Panoptix PS21/LiveScope
    Why am I hanging out here when I could be fishing.....

  6. Member DonnieG's Avatar
    Join Date
    Mar 2006
    Location
    Grahams Forge, VA
    Posts
    2,113
    #6
    Quote Originally Posted by jfishbones View Post
    Looks like a lot of distortion to me, is it on a trolling motor or stick?
    stick

  7. Member DonnieG's Avatar
    Join Date
    Mar 2006
    Location
    Grahams Forge, VA
    Posts
    2,113
    #7
    Quote Originally Posted by Larry3215 View Post
    Donnie, is that a replacement for you first one?

    I think that pretty good for that small a jig. I prefer trails off. They just clutter up the screen I think. Its pretty easy to tell when a target is moving and what direction its going without leaving a trail behind.
    Larry, it is my same transducer & I also think it is pretty good for such a small jig. I am still working on a small bit of interference. My 2 lowrance units and my PS-30 are all clear.

  8. Member MonteSS's Avatar
    Join Date
    Aug 2011
    Location
    Central Virginia
    Posts
    3,710
    #8
    Little interference but not enough to hinder performance. Looks good

  9. Member
    Join Date
    Dec 2010
    Location
    Park Rapids, Minnesota
    Posts
    902
    #9
    To be honest, would expect 1/8 oz jig to show on the screen, that is if my experience with the PS-30 as a example

    For deep jigging walleyes, above my rapala put a small #10 swivel. We fish this in 50-60 of water and the swivel shows above the rapala at that depth.

    Also with a PS-31 find it very valuable pointed to the back when trolling crankbaits for walleyes and lead core. Helps to adjust depth and see fish hit, because I can see my crankbait.

    Forward vu, is it different then down vu? As far a power or sensitivity.

  10. Banned
    Join Date
    Dec 2011
    Location
    chgo hts Il
    Posts
    1,865
    #10
    If that was a 1/8oz. jig, how big would a 10" crappie show up?

  11. Banned
    Join Date
    Dec 2011
    Location
    chgo hts Il
    Posts
    1,865
    #11
    At 10 seconds in there are two yellow spots. One on either side of 25' about 4' down. Are those fish?

  12. Member
    Join Date
    Aug 2013
    Location
    Helenville,WI
    Posts
    80
    #12
    Gary, do you think you would be able to pick up 6 cranks being trolled with boards with the ps31, or are you just picking up the inside crank?

  13. Member
    Join Date
    Dec 2010
    Location
    Park Rapids, Minnesota
    Posts
    902
    #13
    Span across the back? And distance behind? Dependent

  14. Member
    Join Date
    Dec 2010
    Location
    Park Rapids, Minnesota
    Posts
    902
    #14
    Span across the back?

  15. Member
    Join Date
    Aug 2013
    Location
    Helenville,WI
    Posts
    80
    #15
    maybe 30- 50 ft out each side , farthest back would be 100 to 120 ft?

  16. Member
    Join Date
    Dec 2010
    Location
    Park Rapids, Minnesota
    Posts
    902
    #16
    Yep should be able to see