What are the dimensions of one of these trays. Thought I could make one from metal. If anyone has a pic or dimensions they will share thanks.
What are the dimensions of one of these trays. Thought I could make one from metal. If anyone has a pic or dimensions they will share thanks.
The inside demension of the metal recessed trays that we have in stock are 17 inches long by 10 inches wide. Add 1.5 inches to each side for the lip.
JUSTIN
Authorized Dealer & Seller for Lowrance, Humminbird, Garmin, and many other major marine electronics manufacturers.
Proud BassBoatCentral Sponsor since 2006!
Depends on your pedal, mine is made to fit either motorguide or the larger minn kota.
http://trollwell.com/shop/page...param=
Proud BBC SPONSOR - Hand Made in USA
Mine was a custom built one. 3/16 aluminum, hand bent and welded from scrap metal. I had it powder coated silver and clear-coated. Total cost was under $35 back in the day (like around 2005).
I could email you my dims if you want to try building one. My email is in my profile.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BuzzB8 »</td></tr><tr><td class="quote">Mine was a custom built one. 3/16 aluminum, hand bent and welded from scrap metal. I had it powder coated silver and clear-coated. Total cost was under $35 back in the day (like around 2005).
I could email you my dims if you want to try building one. My email is in my profile.
Life is made up of years that mean nothing, and moments that mean it all!!!!!!!!
Reply With Quote
