need help with this part

[dk239]

I posted this also on the trailer forum. I ordered what was supposed to be the correct part from Stratos and C&O. They both sent the same part but it wouldn't fit. I talked to the Stratos parts Dept. and sent them this picture. They sent me a different part that covers the hole but it's not correct unless they have changed the part. Any clues ?

[CandOFiberglass]

what year is your trailer and does it have road armor?

[Stratos Steve]

I answered on trailer post as well. Cover for brake master cylinder check with UFP.com.

[dk239]

It's a 2009 trailer with road armor. 201 XLE

Thanks

[stretch]

another vote for UFP

[dk239]

Sent an email to UFP but haven't heard back yet.

[dk239]

I found out these actuators are made by Tie Down Engineering. Their parts diagram shows the exact part I need. Only problem is they don't sell to the public. I am going to call Anglers Choice and see if they can order me a couple.
I appreciate all your help.

[dk239]

Went to a local dealer that can get Tie Down Engineering parts. They called their distributor and had them send the part. Wrong again. They sent the part for a UFP actuator.

[Stratosone]

I have exactly the same trailer and needed to replace mine last year. Much to my surprise I found the EXACT same piece in the hardware section at Lowes!!!!!! Its a 2" hole cover and for less than $2.00 you can own one...

[dk239]

I'll check it out