20ss set up

[slickrick]

I have a 20ss with a 225 Fitch and a 25p renegade, if you have a similar setup what is your prop to pad measurement and what is your speed and rpm. Thanks

[bassindon2]

Rick, sent you an IM but here is some information for you. I have a 2001 20SS dual consol with the 225 Rude Ram. I currently run a Mark Croxton worked 26p Tempest Plus prop at 3" below pad on a 6" jack plate. With average load I see 5700/5800 RPM and 70 MPH plus from the GPS. But I do have to say that the boat and I are both much happier and more comfortable with a little less speed so I will drive it in the 60 to 65 range with out nearly the pucker factor. On the lakes around here there are just too many big cruisers to contend with the wakes they like to create.