I bought a 96 Stratos 201 Pro Elite, and it is currently at a marina getting the motor swapped from another boat and I can't get to it to measure its length. I was hoping somebody here would be able to help me, I know the newer ones are 20'8" but somebody was telling me mine is more like 19'6", so I don't know who to believe.....The reason I need to know is I would like to order a cover for the boat.
Thanks!
It's a lot closer to 20'8" than it is to 19'6" but I don't have the specifics. It is going to be within a couple of inches of 20'8" if that isn't it exactly.
Jason Phillips
I found some things on the net that said it was 20 foot. I just can't get an official number lol.....I might have to call stratos....
Lookout,
If you're ordering from Aurora or Deans, they should already have templates for your boat model. In other words, you may not need to know the length, only your model no., single or dual console, etc.
Best regards
Allison XB21 2+2, Merc 250 ProXS, 1.62 Sportmaster, Hydromotive Engineering X-OB 29
Excel 1751 Viper F4, Tohatsu 50 4-stroke, EZ-Trac trailer
FeelFree Lure 11.5 Kayak
I was looking at just ordering one from cabelas....just to see if it would fit, if it didn't fit I would send it back. I am basically just wondering if there 20 foot cover will fit....but thanks
I believe that boat is either 20'3" or 20'4". It is a little smaller than the new 201 models.
I have a 96 201 pro xl and it is 20' 4" per the title.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by firemanstevec34 »</TD></TR><TR><TD CLASS="quote">I have a 96 201 pro xl and it is 20' 4" per the title.</TD></TR></TABLE>
Hey man thanks a bunch!!!
My 1989 201 is listed at 20'1" on the advertising paperwork. Not sure about 1996. I think they did a re-design in the early 90's.
Eric H.
when ordering you have to add 1 foot for the trolling motor for the cover to fit
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tlyonshunter »</TD></TR><TR><TD CLASS="quote">when ordering you have to add 1 foot for the trolling motor for the cover to fit </TD></TR></TABLE>
Even if they are semi-custom made for bass-boats? I was hoping they had room cut in for a trolling motor....now that I have the length I am having trouble finding one that will fit. I might have to get an aurora, but I don't really wanna spend the cash I was hopin to spend it on a prop....
the 19'6" would be the 195 or the 295 if that helps.
Trent Canterbury
Huntsville, AL
04 Stratos 195 PXL
16 ETEC HO 200
Reply With Quote
