Results 1 to 7 of 7
  1. #1
    Moderator
    Join Date
    Feb 2007
    Location
    Granby MA
    Posts
    10,430

    removing fuel lift pump...tool?

    motor model # is E150FPLEEA and the ser# is G 04540884
    i'm going to replace my lift pump, i see on the top of the pump what looks like a high pressure line, do i need a speical tool for that?

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,184
    #2

    Re: removing fuel lift pump...tool? (JeffA)

    Nope nothing special needed, you do have a manual right?? If so follow the procedure in chapter 5 page 7 step 8-10 you'll be good to go.

  3. Moderator
    Join Date
    Feb 2007
    Location
    Granby MA
    Posts
    10,430
    #3
    i dont, i'm looking for one though.

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,184
    #4

    Re: (JeffA)

    Did you buy the pump or the rebuild kit? If your local dealer is real nice he'll let you copy pages 5-7,5-8 and 5-9. Of the service manual. If not it isn't a major process to remove the lift pump and replace it.

  5. Moderator
    Join Date
    Feb 2007
    Location
    Granby MA
    Posts
    10,430
    #5

    Re: (ChampioNman)

    i'm replacing the whole pump, the only thing i'm unsure about is the fuel fitting on the very top of the housing, my dealer is 2 hours away, thats why i'm tryin it myself.

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,184
    #6

    Re: (JeffA)

    WTF where is your dealer?? Boston? You have Brunelles in South Hadley, Saunders in Southwick and Lamberts in Westfield. All pretty close to Granby.

  7. Moderator
    Join Date
    Feb 2007
    Location
    Granby MA
    Posts
    10,430
    #7

    Re: (ChampioNman)

    i got the boat in Norwich CT, didnt think of Brunells, they are 10mins away..
    thanks


    Modified by JeffA at 8:45 PM 10/31/2008

Similar Threads

  1. 2005 225hp ETEC Fuel Lift Pump Again?
    By tmuller in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-26-2011, 10:07 AM
  2. How can I check fuel lift pump on Ficht ?
    By loulouton in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 03-10-2011, 12:41 PM
  3. 1998 Ficht Fuel Lift Pump Repair
    By clayshooter in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-09-2009, 01:24 AM
  4. 2004 200HO Fuel Lift Pump
    By MNBen in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 08-22-2007, 04:48 PM
  5. E-tec Fuel Lift Pump
    By edrz20 in forum Evinrude/Johnson Motors
    Replies: 16
    Last Post: 08-18-2005, 04:01 PM