I Class alarm question

[John Hagins]

Does anyone know how to check the audible alarm sensors on the I Class to determine if one is bad? When I set my alarm, the siren sounds. It was fine until Friday. I checked to make sure there was nothing blocking the sensors, and there wasn't.

Thanks, John.

[Mark Perry]

Mine do it if the lids are not all the way shut. Other than I would probably get with a dealer or call Skeeter direct to ask.

[basstrix]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by John Hagins &raquo;</td></tr><tr><td class="quote">Does anyone know how to check the audible alarm sensors on the I Class to determine if one is bad? When I set my alarm, the siren sounds. It was fine until Friday. I checked to make sure there was nothing blocking the sensors, and there wasn't.

Thanks, John.</td></tr></table>

All you need is a magnet and some patience. The magnet I've used is cylindrical and about the size of a jelly bean.

Open one lid at a time, place the magnet on the door sensor, set the alarm. Remove magnet to verify it sets off alarm, repeat for all doors.

You probably have a sensor wire that has worked loose.

Let us know how it goes.

BT