Upgrade on electronics

[Skeet05]

Everybody knows that on the SX model the electronics are cheap---x47 Lowarance. I'm looking to upgrade but my pockets are not so full. You guys have any suggestions that will not cause me to refinance my house to buy. I would like to replace the front and rear since they are the same.

[fishin couillon]

I've upgraded mine a few times already. The only other u it that will fit in those holes is the X67C which is color. Anything else will have to be mounted on the sides. I have HDS units but it all depends on your budget then Decided on size and what brand from there.

[Skeet05]

I've just seen an x67c and it looks like what I'm after. The price was $249, was that about right?

[QuikSilver]

$174.75 plus free shipping http://cgi.ebay.com/LOWRANCE-X...27cba

or check the electronics fourm

[Skeet05]

Thanks alot, I was about to order from somewhere else.

[toddfore]

M68C should fit atleast I hope so since I'm putting 1 in my SX. Gives you GPS also for around $350.

Todd

[Skeet05]

Since you upgraded to a larger unit, what did you use to fill in the holes where the other units were mounted?

[Arctichawk]

I have an 2007 SX200 that I just purchased. It came with a Lowrance X135 up front and a Lowrance LMS 334c GPS in the dash. They fit great!

[fishin couillon]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Skeet05 &raquo;</TD></TR><TR><TD CLASS="quote">Since you upgraded to a larger unit, what did you use to fill in the holes where the other units were mounted?</TD></TR></TABLE> In my dash, i just left the X47. I took out the ducer and wiring so its just the head unit. For the bow i sold that X47 and put a ram mount inside the hole which is where i have the HDS 7 mounted.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arctichawk &raquo;</TD></TR><TR><TD CLASS="quote">I have an 2007 SX200 that I just purchased. It came with a Lowrance X135 up front and a Lowrance LMS 334c GPS in the dash. They fit great!</TD></TR></TABLE>It would be nice if they would be able to fit the bigger units in the SX 190 dashes but cant do it. I've called the mfg of the bow panel and asked if the panel from the SX200 would fit the SX 190 and they said no. I believe those panels and dash is a little bit bigger than the Sx190.