I have a 1998 Jonson 150 hp. moter.
Would it be benifial to install temp guages on each of my heads?
I have a 1998 Jonson 150 hp. moter.
Would it be benifial to install temp guages on each of my heads?
If you are as persnickety about your engine as I am about mine, then in my opinion, it is a good idea. However, some will say they would not bother. After installing temperature sensors on both heads and adding a gauge for each head on mine, I found that I needed to replace both thermostats, both were running cold.
Best regards,
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BIGDOG1956 »</TD></TR><TR><TD CLASS="quote">Thank's for your reply.</TD></TR></TABLE>
You are more than welcome. This is my answer for temperature concerns for my engine. I do a lot of idling and temperature will creep up quickly while idling if anything is amiss. Therefore, I can monitor both heads and water pressure at the same time.
http://s46.photobucket.com/alb...1.jpg
http://s46.photobucket.com/alb...2.jpg
Regards,
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
Reply With Quote
