10 micron filter

[jimcav]

I have a 2005 225zx that i just bought in august I wanted to know if skeeter supplys a water separator gas filter somewhere in the boat. I cant seem to find one, and if not where have people install them it seems to be tight in the back of the boat? Also what do you run the fuel valve on port starboard or dual?
Thanks jim cav


Modified by jimcav at 4:19 PM 11/30/2009

[Gastonbass]

I'm not 100% sure but I don't think the filter was standard on the 2005 boats. Mine in my 2006 20-I is mounted on the transom. I think most of the Skeeter guys run the fuel valve on dual.

[mikeky]

On my TZX-190 I mounted a piece of 1.5" aluminum angle to the rim under the back hatch slightly off center. Bolted the filter bracket to this. Actually I mounted bracket to angle first and then bolted angle to rim.

I have my tank valve on dual.

[fishin couillon]

I have SX model and didn't have much room to mount so I had my BIL make me a bracket. Worked out pretty good.

[jimcav]

thanks for the help guys

Jim cav

[tmcdet]

Mike,

how did you attach the aluminum angle to the rim? Did you drill holes and bolt thru it? Do you by chance have a picture of it

[mikeky]

Yes, drilled holes vertically, attached with 1/4" bolts. No camera for pics.

You can get the aluminum angle at Home Depot in hardware section.

[Neilslure]

In my ZX250 the water seperator is in about the hardest to get to spot they could have put it. In about the center of the transom all the way at the back, its a pain in the keester to change.

[tmcdet]

Thanks Mike, have been thinking on where to put the filter for several weeks now and the lip was one place I was thinking. How long have you had yours on the lip? I assume it is holding up well there. Am also contemplating glueing a pc of wood (plastic kind) to the transom or one of the supports and attaching the filter to that.

[Ranger391v]

I know my '05 TZX 190 didn't come with a filter.

I mounted mine to the big aluminum plate that strengthens the transom ..... port side, up under the deck/ rear transom area lip. Had to disconnect the pumpout hoses and re-route them, but it made for a cleaner install than antwhere else I could have mounted it.

Good Luck !

[mikeky]

Mounted it a few months ago, holding up fine.

[Bass Junkie]

This is how I did mine on my TZX190. I used a Racor filter. They make the ones for Yamaha and they are cheaper. You can find them at http://www.boatfix.com

[jfdawson]

Here's mine.. 2005 ZX 225 ( did not come with one from the factory )



jd

[Z518 Comanche]

On my 06 ZX-190, you about have to stand on your head in the transom area to see the filter

[Skeeter Jay]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jfdawson &raquo;</TD></TR><TR><TD CLASS="quote">Here's mine.. 2005 ZX 225 ( did not come with one from the factory )



jd</TD></TR></TABLE>

Thats pretty much how mines mounted in my '05 ZX225, it didnt come from the factory like that either.

[SkeeterJohn]

Exactly the same spot on mine... with 4 batteries there's nowhere else it really fits that's still easy to access.. I'm not sure which year they became standard but it wasn't 05 as mine didn't have one until i added it.

[DJSkeeter]

06 mine has one that came from the factory that way. I asked the dealer to install one after reading about it in a magazine, they said it already had one.