Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jun 2007
    Location
    Delta
    Posts
    95

    Cann't figure out my gear ratio

    Model :E225DHLSU
    Serial:05205976

    I'm finnaly getting this thing to run like it should. Now I'm wondering if i have 1.71 gears in my lower unit. My tach was recently checked at the dealer its dead on.

    Running a 28p 4 blade power tech TR04 77mph@5500 rmps.

    According to the prop slip callculator @ gofast.com i'm running at 1% slip.
    Now if I factor in that the prop has cup and add 1 more inch in pitch its at 5%.

    But if i put 1.71 gears in it comes up to 13% like it should be. but I was under the assumption that I have the 1.86 gears.

    I had a new LU installed BRP calls it there L2 case. But I have no Idea what this is other than the water pick-ups have plastic screens on them. And it does not feel as if it is geared any different than my old LU.


    1995 BULLET 20XD/ 2007 EVINRUDE 225HO

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,092
    #2

    Re: Cann't figure out my gear ratio (dirt2801)

    If ya turning a 28 P prop to 5500 I'm thinkin' a 1:86-1 JMHO It's an 07 m/y so I'm pretty sure its not the new case.

  3. Member LIQUID NIRVANA's Avatar
    Join Date
    Aug 2006
    Location
    New South Wales, Australia
    Posts
    659
    #3

    Re: Cann't figure out my gear ratio (dirt2801)

    This is the L2 case. Available in Blue or White.
    Bigger & Stronger Pinion & Gears & a pinned rear bearing carrier compared to the older L case. It also has external water intake screens which are available in various formats for issues pertaining to some boat such as "flats" boats which run their motors really high. Also 2 different gear ratios (1.71 High Speed & 1.86 Higher torque). This case was release in mid 2008. If you want more info I can post some more pics. Just let me know.
    Ken.



    ==================================================



    Modified by LIQUID NIRVANA at 9:18 AM 8/31/2008
    ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
    `````````````````````````````````````````````````` `````````````````````````````````````````````````
    DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE

    EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,198
    #4

    Re: Cann't figure out my gear ratio (LIQUID NIRVANA)

    1.86:1

  5. Member
    Join Date
    Jun 2007
    Location
    Delta
    Posts
    95
    #5

    Re: Cann't figure out my gear ratio (ChampioNman)

    need to find out where i can get the other water screens, any one know ,, maybe i could jack it up a lil further. thanks


    1995 BULLET 20XD/ 2007 EVINRUDE 225HO

  6. Member
    Join Date
    Feb 2005
    Location
    newsalisbury
    Posts
    1,141
    #6

    Re: Cann't figure out my gear ratio (dirt2801)

    if i were you i would try a 28 raker on that boat more rpms and speed i bet.imguessing 80mph and 5800rpms.just about right.give one a try.it will be faster than the tro4.

  7. Member LIQUID NIRVANA's Avatar
    Join Date
    Aug 2006
    Location
    New South Wales, Australia
    Posts
    659
    #7

    Re: Cann't figure out my gear ratio (dirt2801)

    Screens are available through any E-Tec dealer BUT if you have an L2 gearcase. I do not know if optional screens are available for your case.



    ================================================== ===
    ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
    `````````````````````````````````````````````````` `````````````````````````````````````````````````
    DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE

    EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"

Similar Threads

  1. Gear Ratio 250 E-Tec
    By fishnfireman in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 08-16-2011, 03:27 AM
  2. What gear ratio?
    By usblitzz in forum Yamaha Motors
    Replies: 3
    Last Post: 03-17-2009, 04:23 PM
  3. gear ratio
    By m_cotton84 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-12-2009, 05:18 PM
  4. Gear Ratio??
    By Travis in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 07-11-2007, 12:10 PM
  5. Gear Ratio
    By Earl320V in forum Yamaha Motors
    Replies: 2
    Last Post: 04-03-2007, 01:30 PM