60 degree v12 E-tec, just saw it today! I have a pic but its on the old fashioned camera, gota get it developed! Looks like it is on a 10" mid and sorta sits behind the mid-section instead in it. ???
60 degree v12 E-tec, just saw it today! I have a pic but its on the old fashioned camera, gota get it developed! Looks like it is on a 10" mid and sorta sits behind the mid-section instead in it. ???
What the hell!!!!!! You guys must be board You need to go fishing
If guns kill people, then pens miss spell words!
Post em on another board and tell us where so's Rus can't delete em!!!!!
Just email it to me and I'll distribute it to the properly authorized personnel...
V-12 E-Tec Photo's
[IMG][/IMG][IMG][/IMG][IMG][/IMG]
(Deleted by RUSTY63)
Uh oh. Here we go again!
Rusty told me to not do this any more, but here is a pic of Rusty driving the still under development 14' wide bottom Yazoo flatbottom powered by the just released V-12 E-Tec H.O.
(Edited by Rusty63: Picture Deleted)
Jason Phillips
If BRP really wants to compete with the veropig on offshore style boats then why not a V12. It would come in at about the same weight as the merc and would produce 300hp in it's lowest hp rating. 350 to 400 hp would not even begin to stretch the potential of the V12. The veropig is already stretching itself making 275hp from 2.6lts. It is going to be a high strung motor when it makes 400. A V12 would just be loping along at 400.
A 60 degree V12 would be an even-fire motor and would be increadably smmoooottthh!
A company in Australia made V12 crossflow outboards back in the early eighties. Basically took 2 evinrude 235's and welded them together. So it can be done!
I just wish they would have turned what they got up one more notch!!!!
Neveredge do you fish in the canals on the north end of the Cape? I used to live there (moved 5 years ago) and fished them all the time but when I came down this past Dec/Jan. I found that some of the old access areas were gone. Anywhere that you know of that I can put my boat in to fish the north end canals? I don't mind fishing some of the south cape waters but I would like to keep the motor in fresh water. Those snook are fun but you can get some of those tarpon that come into the canals on the north end one cast then get a bass the next so that's what I'm looking forward to do next year when I come down. Thanks for any help.
Daryl
Daryl
Neveredge, They can get More horsepower out of the block they are using.
Ditto to what Rusty sez,
Dem babies can crank up the HP. The injector was designed to handle 10K and so was the original block design. Think about a 6 banger capable of cranking out 480 hp and not being hurt, and meeting CARB 3 emissions
guess i want even try to post the pic of the e-tec 9.9 ho again
Chuck!!!!
OK, you guys ain't right!! You have got me drooling and my pocketbook already hurting just thinking of a 300 E-TEC. I think I would loose one of my fishing buddies cause the wife sure wouldn't be getting in that boat.
Modified by Groman at 7:14 AM 5/17/2005
I can't wait to get a hi-po Etec on an Ally and take her to the drags....
Reply With Quote
