<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkeeterjeffOK &raquo;</TD></TR><TR><TD CLASS="quote">Here are some numbers I tried a few weeks ago on a 2007 20I / 250 hpdi, full tournament load, 3/4 full of gas, 2 1/2 inches below pad:

V-Max T-1 25 - great hole shot, 5800 rpms, 73 GPS, good lift
Spinelli 27P - great hole shot, 5400 rpms, 71 GPS, good lift
Tempest 27P - okay hole shot, 5400 rpms, 73 GPS, almost too much lift
Powertech TRO 4 27P - great hole shot, 5400 rpms, 70 GPS, pretty good lift
Powertech VMS 25P - great hole shot, 5800 rpms, 72 GPS, really good lift
Powertech VMX 25P - great hole shot, 5400 rpms, 70 GPS, pretty good lift

Now with motor raised 3/4 of an inch (1 3/4 inch below pad):

Powertech TRO 4 27P - good hole shot, 5500 rpms, 70 GPS, okay lift
Tempest 27P - pretty good hole shot, 5700 rpms, 75 GPS, she liked it
Spinelli 27P - great hole shot, 5700 rpms, 72 GPS, really good lift
Powertech VMX 25P - great hole shot, 5500 rpms, 71 GPS, good lift
Tempest 26P - good hole shot, 5700 rpms, 73 GPS, pretty decent lift

Water pressure was 25 or better throughout. Hope this helps. If we could just get a little global warming in our area, we will be trying a few other props and set-ups.

Skeeterjeff
</TD></TR></TABLE>

did you run the Yamaha 25T-1 after raising the motor? I'm wondering if you forgot to type the results, or didn't get a chance to run it.