Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jul 2007
    Location
    Avon
    Posts
    549

    Do I need a spacer

    I tried to put a tempest plus prop on my yamy and it seemed as though it was to tight in the hub area. Is there a space washer that converts a mercury to yamy?


    Matt
    MATT HAMILTON 2018 FX21LE

  2. Member Doug Vahrenberg's Avatar
    Join Date
    Sep 2005
    Location
    Higginsville, MO
    Posts
    12,740
    #2

    Re: Do I need a spacer (allskeeter)

    You need a Hub Kit available from Mercury to adapt to the Yamaha to run te Tempest Prop. Check with your local Mercury Dealer.

    --


    http://www.dougvahrenberg.com/

    BASS Central Open- Competitive Bass Angler and Humminbird Guru
    Visit my website to learn about my sponsor's products, fishing tips and techniques.

    Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/

  3. Member
    Join Date
    Jul 2007
    Location
    Avon
    Posts
    549
    #3

    Re: Do I need a spacer (Doug Vahrenberg)

    Will do thanks for the info. I'm running a ZX210 with a 225 0x66. My friend is running a 27 yamaha prop on the same motor on ZX225. He runs about 77 mph.My boat only runs about 62 with a 4 blade hydro. Do think my boat would have the same results even thought it's a little bigger?
    Thought you might know since you seemed to be well rounded in the skeeter area.
    Thanks again

    Matt
    MATT HAMILTON 2018 FX21LE

Similar Threads

  1. Spacer for RAM mount
    By bbbking in forum Ranger Boats
    Replies: 2
    Last Post: 03-21-2012, 11:19 AM
  2. Spacer plates...spacer plates...spacer plates
    By ChrisCarsonMarine in forum Mercury - 2.0/ 2.4/ 2.5 Liter High Performance
    Replies: 23
    Last Post: 03-16-2012, 06:16 PM
  3. Gap between motor and spacer?
    By Just Tom in forum Bullet Boats
    Replies: 2
    Last Post: 04-28-2011, 08:47 PM
  4. spacer question
    By ezmuny13 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 01-19-2010, 03:32 AM
  5. 2in or 4in spacer plate
    By fastnfish in forum Cobra Boats
    Replies: 3
    Last Post: 01-05-2008, 12:14 PM