1998 Skeeter SS90 wiring diagram?

[CDNSkeeterBassHntr]

Hello everyone, Can someone help me locate the wiring diagram for an SS90 that includes the front/rear live wells, bilge, Lights/anchor, horn.
I have contacted skeeter and they got me in contact with thier electrical supplier for the diagram. I am hoping i can locate the diagram online and enjoy the upcoming weekend on the boat instead of being stuck on dry land and having to wait for the diagram in snail mail transit.

If someone out there can help i will be ever grateful.

Thanks again

[-BjBnet-]

I have some stuff, not too clear though but it might help. Having your email addy in your profile might help too
What do you need to know? YOu might be better off telling us what your problem is so we can help you out. I can run outside and check some wire colors if that's what you need.
Your livewell and bilge pumps probably have an inline fuse. I had to replace all three fuse holder when I got my boat.. Also make sure your switches actually work. Try swaping them with another that you know for sure works.
Keep us posted and welcome to BBC EH!!!

[CDNSkeeterBassHntr]

Howdy partner and a big Eh to you too.


Not really a big problem but what happened was i just got the boat went out and was blowing fuses left and right for the troller. Installed a new and different model recepticle for the trolling motor. I had no room for the forward live well switch , so i moved that back to the console. Doing that i found myself having to take apart the other switches to make room to work. I forgot where the wires go back on the rear live well, Nav lights and bilge. I figured out the horn and main power all i need is to figure where the wires that are remaining have to be placed on the remaining three switches. If you could tell me the Bilge wiring color and the forward livewell i should be able to get the Nav lights in order.

Any help will be appreciated.

Thanks again
Victor

[-BjBnet-]

normally the pumps are brown....wether livewell or bilge so you might have to figure out which wire controls which pump.
And lights are usually blue for your gauges and such and probably gray for your anchor lights but to make sure check your light pole socket to see what color is there(just unscrew it from your deck)
ground will be black.
Hope this helps and I'm sure someone will chime in if I made a mistake ....but that's how it is on mine

[CDNSkeeterBassHntr]

Thanks for your help. I located the diagram online and will post the image here for future reference if i can figure out how to post images with the add image icon?

regards

[-BjBnet-]

that would be awesome. If youcan't figure it out just send me the link and I'll post it for you.

[kirbyv1]

I would like to see that diagram if you would not mind posting it or emailing it to me.

[-BjBnet-]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kirbyv1 &raquo;</TD></TR><TR><TD CLASS="quote">I would like to see that diagram if you would not mind posting it or emailing it to me.</TD></TR></TABLE>
Here ya go.
Thanks Victor for supplying this schematic
(try saving the image to see if the pic turns out bigger, or you can check your email )

[kirbyv1]

thanks for the help bj