I have a 1992 evinrude 200xp and the rev limiter is set at 6700 rpm on this motor and I was wondering where the motor should run rpm wise for optimum performance? Also the engine is on a 92 basscat pantera 2 that is 19 ft long and weighs 1500lb so what prop should be run with this combo?
around 5500-5800 and the 25 renegade or 24 raker should be close....
+1b but Renegade Bass and not a Shooter.
why not a shooter? I have a raker and a shooter now
Let me say that the Renegade Bass is a more suitable blade than the old engineering of the shooter. Same pitch each the Renegade Bass will out perform the Renegade or Shooter all being old OMC 4 blade small hub props. The Raker will probably not perform as well on hole sho while it will probably be as fast and give the same bow lift...
Reply With Quote