Thread: Blinker Trim

Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Mar 2008
    Location
    CLEVELAND
    Posts
    20

    Blinker Trim

    Anyone know approximate cost to install the blinker trim on an 03 Ranger 520 w/ 03
    Erude 225? Thanks,guys!

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,095
    #2

    Re: Blinker Trim (charl58)

    The switch is in the neighborhood of 50.00 + labor @ your local shop.

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #3

    Re: Blinker Trim (Bassmeister)

    Hey Charl sorry I didn't e-mail you back in a timely fashion, busy time of year. The switch list depending on dealer for $50-$75. You can install it yourself, all you have to do is pop the wheel and drill the holes or tap into your existing helm and splice the wires into the harness. Do it yourself and save $$.

  4. Member
    Join Date
    Mar 2008
    Location
    CLEVELAND
    Posts
    20
    #4

    Re: Blinker Trim (charl58)

    Michael I sent you an email a few minutes age about xd oil.

  5. Member
    Join Date
    Mar 2008
    Location
    CLEVELAND
    Posts
    20
    #5

    Re: Blinker Trim (ChampioNman)

    Champion man that is scary as all get out?I am not a mechanic person and my wife would pay for this instead of listening to me @#$%^%.

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,201
    #6

    Re: Blinker Trim (charl58)

    Drop the boat by go to Anderson for shopping and lunch and come back and get it when you get done having a relaxing afternoon. Switch installed $120.00.

  7. Member
    Join Date
    Feb 2007
    Location
    greenville
    Posts
    1,191
    #7

    Re: Blinker Trim (ChampioNman)

    I put mine on the night b/f leaving for the Guntersville Southern Rally--
    ---pulling steering wheel, incl. trip to AutoZone for gear puller--3hrs.
    ---putting trim on, then finding out the blinker arm blocked a gauge--1hr.
    ---re-pulling wheel, which flew off bloodying my nose and broken glasses---$200
    ---searching for Woodruff key--1/2 hr.
    ---drilling/filing holes in mounting bracket to avoid blocking gauge--1hr.
    ---mounting and splicing in trim--1hr. due to pain/broken glasses
    ---Blasphemies included---all of eternity


    Letting Fred do it all for $120 while you shop and relax---PRICELESS!!

  8. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,095
    #8

    Re: Blinker Trim (BassOrBlast)

    Damn Kevin!!!! It ain't that hard!!! But if you arent' mechanically inclined it can be. Charl , Fred can help you out, or someone closer. That should be a ballpark # Yessir you can mix the BRP oils.

Similar Threads

  1. Blinker trim
    By WaYoop in forum Champion Boats
    Replies: 7
    Last Post: 03-02-2009, 05:24 PM