about to pull the trigger on a 721 but wanted to make sure i have enough space in the pole barn. if not looks like a good excuse to add on. you just can't have enough room.
about to pull the trigger on a 721 but wanted to make sure i have enough space in the pole barn. if not looks like a good excuse to add on. you just can't have enough room.
2016 Phoenix 921 pro xp/250 Mercury Pro XS/ 12” Altas Hydraulic/ Ultrex/Solix 15 bow/Solix 15 SI console/10’ Power Pole Blades
Agree with the "just can't have enough room". Ya certainly wouldn't want to scratch it up.
I'm starting to do a count-down to see which one will be finished first...the boat or the building.
loa motor down tounge out-25.75
" " in-23.75
with at trailer axle 8.1
jr. was kind enough to send me the measurements and i am happy to say it will fit. still might want to add on to the pole barn anyway.
2016 Phoenix 921 pro xp/250 Mercury Pro XS/ 12” Altas Hydraulic/ Ultrex/Solix 15 bow/Solix 15 SI console/10’ Power Pole Blades
Jr is alright. Ordered my bird from him.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by tmelson »</td></tr><tr><td class="quote">loa motor down tounge out-25.75
" " in-23.75
with at trailer axle 8.1</td></tr></table>
Just as a reminder, there is a difference of about 4" depending if you rig with a Yamaha or a Mercury. Based on those measurements I would venture to say that is equipped with a Yamaha. It should be close to 23' 4" for the Mercury option.
Tightlines,
Eric
Reply With Quote