Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Hillsborough, NC
    Posts
    662

    2005 225HO etec water pressure

    My water pressure has dropped a little it used to be 5psi at idle and 21 at wot 5800rpms. Now at idle its 3-4 and wot its only 19. Is this within specs or is it time to get the water pump replaced??
    Cary Seekins
    201 XLE, 250 Pro XS

  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2

    Re: 2005 225HO etec water pressure (Cary)

    Its a bit low.
    How many hours on it?

  3. Member
    Join Date
    Jun 2004
    Location
    Hillsborough, NC
    Posts
    662
    #3

    Re: 2005 225HO etec water pressure (ELGIN)

    about 250 hrs.
    Cary Seekins
    201 XLE, 250 Pro XS

  4. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #4

    Re: 2005 225HO etec water pressure (Cary)

    Replace the water pump with a complete kit.

  5. #5

    Re: 2005 225HO etec water pressure (ELGIN)

    What pressure should a 2006 200 HO have as mine has only got 15psi at full noise. It has been like this since new and i have 2 mate's that are only getting 15 psi from thier new 200 H.O's.



Similar Threads

  1. 2005 etec 225ho help!!!
    By semperesox in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 06-04-2010, 01:33 PM
  2. Can somebody tell me the history on this motor -- ETEC 2005 225HO Please!
    By VOL-FISHER in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 08-10-2008, 07:53 PM
  3. 2006 225HO ETEC(w/2008 dressed block) water pressure/hot alarm
    By Greg_Z21 in forum Evinrude/Johnson Motors
    Replies: 14
    Last Post: 03-10-2008, 12:56 PM
  4. 2005 ETEC 225HO Idle/Warning shut down?
    By gabernet in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 10-17-2006, 12:10 PM
  5. water pressure on 225HO E-Tec?
    By dladue in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 09-08-2005, 04:01 AM