Anybody changed out their fuse block on their boat and if so, what brand did you use? 12 circuit
Fuse block
Anybody changed out their fuse block on their boat and if so, what brand did you use? 12 circuit
I found a Blue Sea System fuse block on Amazon. I did a over kill with running 10 gauge wires to console and then from fuse box to the bow of the boat for the other graph. 30 amp fuse at the battery to cover the fuse box and then put 3 am fuses in the fuse box to cover the graphs.
2015 Ranger RT188 (white) * 2015 Etec 115 * Minn Kota Fortrex #80 * Humminbird Helix 12 MSI GPS G3N @ Helix 12 G4N on bow * Humminbird Helix 12 MSI GPS G3N at console * M360-MEGA Live
Blue Water LED Red Deck Lights, LED White Light in Rod Box & Trailer Backup Lights * V-T2 Live Well Vents * Lew's Rod and Reels. Cool Foot pad on t/ motor .
tried to show picture but not working
Last edited by Sammiew; 08-19-2015 at 02:19 AM. Reason: mistake
2015 Ranger RT188 (white) * 2015 Etec 115 * Minn Kota Fortrex #80 * Humminbird Helix 12 MSI GPS G3N @ Helix 12 G4N on bow * Humminbird Helix 12 MSI GPS G3N at console * M360-MEGA Live
Blue Water LED Red Deck Lights, LED White Light in Rod Box & Trailer Backup Lights * V-T2 Live Well Vents * Lew's Rod and Reels. Cool Foot pad on t/ motor .
Thanks ! PM sent
I also used a Blue Seas fuse block for my electronics. Mine was a 6 fuse panel.
I had an unused pair of #8 wires that were originally for my trolling motor and I had ran #6 when I upgraded it. I ran the #8 to the fuse panel in a storage box to feed the graphs and NMEA, also ran spare wires to bow and console in case I need them later.
Reply With Quote