Set the Jackplate at 2 3/4 on the Bobs dial put the trim tabs about 1/2 way down no more as it will keep the bow to low.. Raise the trim up about 1/8 trim and let her eat as fast as condition will allow.. I have found that my 2100 runs the rough stuff the best around these settings you may have to adjust things slightly according to load conditions.. I haven't had anyone ride in my boat that didn't brag on how well it rides in rough water..
I can make it ride as rough as a cobb by over or under trimming.. There is a sweet spot once you find it make a mental note of where everything is set so that the next time your faced with those conditions you will know where you need to set everything ...