Can anyone tell me where or if I can buy a new Graphic kit for this Motor? I have been told they were pro staff graphics and my local dealer told me he could not get them.
Can anyone tell me where or if I can buy a new Graphic kit for this Motor? I have been told they were pro staff graphics and my local dealer told me he could not get them.
Bears Baits
Calhoun Plastic
Custom Presto Pouring Pots
You can not buy them, you will need to find a Pro Staff cover with those decals.
Ok Did that Elgin I own this motor but the graphics are scratched up I wanted to replace them. So I can not buy them new?
Bears Baits
Calhoun Plastic
Custom Presto Pouring Pots
If you can find them, I'd like to get in on that purchase. Wonder if they can be re-produced by one of our sponsors here?
'05 Stratos 200 ProXL, '05 Evinrude 225HO
Javelin I am going today to talk to a local graphic shop to see if they can reproduce them. I found the font used on them and a flag that is real close to the original one. Hoping they can reproduce them . If they can I will let you know
Bears Baits
Calhoun Plastic
Custom Presto Pouring Pots
'05 Stratos 200 ProXL, '05 Evinrude 225HO
I bet Iguana Graphics (igs65, a board sponsor) can do those up for ya!!
Modified by Stratos201basser at 1:37 PM 2/1/2008
Bear...sent you an IM
Hey Dave
Was Iguana able to help you out? I may want to replace the graphics on your old engine with something like that!
Hope you got your new one running right.
ran great for 20 minutes then locked up! They are suposed to come pick it up Monday and try again.
Bears Baits
Calhoun Plastic
Custom Presto Pouring Pots
no one answered did someone find a way to do those graphics? That was nice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bear21211 »</TD></TR><TR><TD CLASS="quote">ran great for 20 minutes then locked up! They are suposed to come pick it up Monday and try again.</TD></TR></TABLE>
Make sure they find & fix the real problem or it will blow again. I remember this engine from this post. Flashing red lights went off when the seller said bad rigging took out one cylinder.
http://www.bbcboards.net...34787
Back on topic, did you find a source for the Prostaff graphics? I sure would be interested in a set if they would fit a 3.3L Etec cowl.
IguanaGrafix.com said he could do the Graphics but at this moment I have other things to worry about so I can not do anything yet.
Bears Baits
Calhoun Plastic
Custom Presto Pouring Pots
Bet Daryl could make a yellow flame border you could apply if he can find a cowling to do a take off on..It wouldn't be the whole decal but close.........G
Reply With Quote
