<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by champion191dc &raquo;</td></tr><tr><td class="quote">Butch Mine has rivits,for the rub rail, do I need to changed them to screws?</td></tr></table>

Yes, most likely - I did that on the 181 based on Pat Goff's suggestions... Drill out the rivit (carefully - not too big) - Put some 3M 5200 on the new stainless screw - Tighten it down - Reinstall rope rub-rail - It ain't going anywhere after that...