Removable Passenger Console

[Tx Champ]

Can someone with a 07 or later with removable passenger console shoot me some pix and measurements? I've got the new hardware ordered, but instructions and templates are a "Dealer Item" So, I'm on my own unless I take it to a dealer, closest of which is Cabela's in Ft Worth (175 mi) ... Now, tell me everyone would have a warm fuzzy taking your boat there for a console installation ...

[Skip]

Reggie I have a jigsaw, 18v drill, and a dremel tool I can get that thing to fit if you want my help

[Tx Champ]

You just grab yer tools and come on up, Skip & I'll put you to werk ...

[Skip]

WORK there is that 4 letter word that makes my back start hurting

[dstacey]

I installed my own console in 2007 for my 183 but there was no such thing as a hardware kit back then. If you think I can help you I would be glad to offer any advice I have.

I would be interested in hearing and seeing what hardware you have. Is it from factory?

[Tx Champ]

Yeah ... talking to Jason Bragg, the removable console is standard. The hardware contains some trim pieces and the bolts have knobs on them. I know Phoenix has some trim that snaps into the holes when the console is removed to cover them up.

I was hoping that maybe someone that had a 2011 with removable colsole might belly up and help me out. I just hope they havent made any changes to the console itself.

Guns up!!

[Charlie206]

I think they have a 210 in stock in Beaumont Reggie, if they haven't sold it. I can take a digital camera over there if no one on here can provide them.

[Tx Champ]

Thanks Charlie ... I'd buy you a ice cold Pabst for that!!

[Ohirolina]

When I pick mine up, I will try to remember to take some pictures of the console and how it mounts and email them to you. If you don't get them by Sunday 6/26, IM me for a reminder.

[Tx Champ]

Will do ... thanks!!

[bassfinder1]

If you would like I can send you a tube of liquid nails and 2x4's

[ChampioNman]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Ohirolina &raquo;</td></tr><tr><td class="quote">When I pick mine up, I will try to remember to take some pictures of the console and how it mounts and email them to you. If you don't get them by Sunday 6/26, IM me for a reminder.</td></tr></table>

Can't hide money!! Congrats on the new ride Ron. Bring it down to Hartwell so I can check it out. Just leave Terry home.

[Ohirolina]

I am worried if I launch at Hartwell, the boat might melt. Sunday before last the water temp in mid lake was 86.6.

You won't like it much, it has a black motor on it.

TD and I are thinking about going to Jocassee if it gets here and is ready Friday.

[Ohirolina]

Pictures sent

[Tx Champ]

Got the pix ... a bit hard to tell with those. I'd like to see it with the console off and maybe some measurements ...

[Ohirolina]

Check your email again.

[Ohirolina]

Look one more time

[Tx Champ]

Back atcha ...

[pmgoffjr]

You can do it the Smithwick way Reg...
Tube of sicoflex, lay a big glob of it on, and tweak it around until it looks good....then be sure and remove the passenger handle "you don't need that"

[Tx Champ]

Going with the removable ... I've decided I like the "screw your buddy" layout for Ts, but need the console when Nana and the grandkids go along ...