'93 20XRD with a 2.4L Bridgeport, CLE 1.87 lower. Im upgrading to a 12" Rapid Jack. My question is do you guys suggest putting 2" wedges on at the same time, or just running with the 12"? Thanks
Jackplate question?
'93 20XRD with a 2.4L Bridgeport, CLE 1.87 lower. Im upgrading to a 12" Rapid Jack. My question is do you guys suggest putting 2" wedges on at the same time, or just running with the 12"? Thanks
2" spacers you mean? You should be ok with 12", you can always go back and add spacers later if you like. If you meant 2* wedges, you should have a decent enough holeshot without them.
2 deg. Wedges helped mine, but I have a 3 liter, which is alot heavier. Honestly I don't think it will hurt on yours, it will probably help some, since you will not b using all the trim anyway.
Do they have rehab for this addiction,cause I need to go!!!!!!!!!!!
Yea I'm talking about 2 deg wedges. Although its got a Bridgeport, its still a 2.4L, and with a heavy fishing load and full livewells, its a little more sluggish than I like coming out of the hole. I trim it pretty much all the way under as it is now, I was thinking the wedges would help
It probably will.
Do they have rehab for this addiction,cause I need to go!!!!!!!!!!!
Reply With Quote