Guys dont have much water pressure..hot alams went off today...It takes the motor for ever to show any water pressure...then when you get on plain
you can keep the rpm the same and the gauge wil move around everywhere
10 psi then it may jump to 15 to 20 ps1 then may go back to 10psi..what is going on..I just had CandO to do the new maps and heat pins or what ever there called..please help
Time for a new impeller.............................Roger
"Never argue with an idiot; He will beat you to death with stupidity"
Jeff, get that motor to a dealer and let them take a look at it. It isn't very old if I remember correctly. Something is not right at all.
no it only has 24 hrs on it bought new in Jan this year...I now have a hyd plate on it...you can move it all the way to where it bottoms out..or move it to about 3 in under the pad..it still does the same thing
Definitely sounds like something is amiss that the dealer needs to take a look at. The guys at C&O are top notch and will get her squared away for you.
Reply With Quote