Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2007
    Location
    konawa
    Posts
    187

    2003 evinrude engine questions

    I AM LOOKING AT A 2003 RANGER WITH A 2003 EVINRUDE ENGINE 200HP HO ENGINE ON IT. HAS ANYBODY HEARD ANY GOOD/BAD ON THIS MOTOR? THE GUY SAID IT IS A BOMBARDIER ENGINE. DID THEY TAKE OVER THIS YEAR MODEL?

  2. AR Bass Club/AR Fishing Moderator GhostComanche's Avatar
    Join Date
    Nov 2005
    Location
    Bay, Arkansas
    Posts
    17,050
    #2

    Re: 2003 evinrude engine questions (hogman1979)

    Welcome to the BBC...............a good place to be. First of all, release the caps lock......that way all won't think that you are shouting. I have a 2003 Evinrude 200, and yes it is a BRP engine. Engine has been awsome, and absolutely trouble free. I have ran XD 100 in it since it had 12 hours on the engine. Engine will fly on my 519 !!.........Prop the engine to max rpm's of 5800 and let her go. I would not run it over 5800 rpm's...............Engine will run over that a little and be safe, but this is the top of the recommended wot rpm range.............running hard over that for a duration, and it will start to shake some of the powerhead bolts and nuts loose. Just keep a good check on all of the components every once in a while and all will be fine. Once again, they are awsome engines. ........................Roger


    "Never argue with an idiot; He will beat you to death with stupidity"

Similar Threads

  1. 2001 evinrude ficht 150hp, good engine or bad engine?
    By bassman34 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 01-13-2012, 07:15 AM
  2. 2003 Evinrude 225 HO - Computer Engine Statistics Problem
    By champ203rude in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 06-12-2011, 05:08 PM
  3. 2003 225 Hpdi blown engine.
    By jawjerkr in forum Yamaha Motors
    Replies: 19
    Last Post: 04-24-2009, 12:27 PM
  4. Anyone running a 2003 Yamaha F225 TXRB Engine
    By wanttofish in forum Yamaha Motors
    Replies: 0
    Last Post: 03-15-2009, 02:19 PM
  5. Differences in new E-Tec's and my 2003 HO Engine?
    By gahealey in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-28-2005, 06:23 PM