Does anyone know which flush cleat to use for replacements

[back_lash]

Looking at replacing the front two cleats with a flush type or pull up cleat. I've got a 2000 with the standard cleat that came with the boat but want to replace them but not sure which ones would work / cover the current holes.

Thanks for any help.

[canadabullet]

I use the Scotty flush mount rod holder cleats made of black plastic that have the little rubber caps attached to keep water out. They feature optional , removeable rodholders or cleat rings that can be installed in seconds and serve double duty very well. The only drawback to them is a 1 1/4 hole is required to be drilled in order to flushmount them with a holesaw and they require four screwholes . They look very good installed and weigh next to nothing.

[Dex202]

Backlash, I'm thinking of doing the same. Most sites dont give measurement of new cleat. Let me know if ya find something.

[back_lash]

I'm looking at Attwood. They have the measurements on there website. Looks like the 4 1/2" would work fine...