Just picked it up yesterday. 2007 210DC with 250HPDI Colors: Rasberry,Pewter Green pins with Gunmetal carpet.
Just picked it up yesterday. 2007 210DC with 250HPDI Colors: Rasberry,Pewter Green pins with Gunmetal carpet.
Fear-This
2000 202 pro v / 04 250 Hpdi 27 T1 Work
15" Rapid jack 1 1/2 inch below Pad
Tourney Loaded Wot 80.6 gps
Light 83.9 gps
Chris Dunn...Dallas, Ga.
2006 Blazer 202 / Yamaha 250hpdi
TEAM TEXAS
Team Blazer 202 / Mercury 225 EFI
P&J FISHING ENTERPRISES
\"HIGH PERFORMANCE FISHING\"
"How fast do you want to go?"
[I]Blazer 202 DC - 300 Hammer
Beautiful boat. I'm very curious about that exact setup so please post your numbers when you get a chance.
Jason Phillips
Jason, it has the standard 10inch slidemaster plate with a 27m prop. 75.8 gps at 5500-5600 so far with 5 hours on the motor. The plate halves are even with each other at the top where Blazer rigged them at which is low (I don't have a prop shaft measurement yet). Will start raising the plate after I get 10 hours on the motor.
That is where mine came in at.... that is at about 4" under the pad which is way loooooooooooow..... raise it up and it should make a big difference, not to mention much easier to drive.
Jeff, I am just waiting for my ten hours of break-in to be done then I will raise the plate. I already have a starting height I will raise it to based on my 03 210. Your right about it being easier to drive after raising the plate. My last one was after I raised it.
Makes sense and make sure and post numbers when you get it dialed in ! Thanks
That is a beautiful boat,,,congratulations,,,great colors...
Very nice!
Congrats!
Reply With Quote
