Thread: 202/300HPDI

Results 1 to 12 of 12
  1. #1
    Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251

    202/300HPDI

    I've got a 96model with a new 05 running a half inch below pad at 86mph gps at 5600 rpms with a 29T1! still have good h2o pressure! do ya think there's any thing left?

  2. Member
    Join Date
    Jun 2004
    Location
    Jacksonville
    Posts
    8,956
    #2

    Re: 202/300HPDI (Porkfrog)

    Probablly getting the prop blueprinted by Mark may give you some more RPM's but I don't know about in Hogansville but in Jacksonville it's HOT! Take that into consideration also, Your probablly loosing some in this heat!

    Signs by Crazy Elvis, Official Decals of TeamFATBOY!
    I called my stockbroker and asked him what I should be buying.
    He said, \"Canned goods and ammunition\".

  3. Member Fear-This's Avatar
    Join Date
    Nov 2005
    Location
    Willow Springs
    Posts
    1,549
    #3

    Re: 202/300HPDI (Porkfrog)

    The Man that would know is Nasteere ,IM him and he will let you know what it takes to run 90+. can't you out run 99% of the boat in Ga now, sweet setup give the big man shout.
    Fear-This
    2000 202 pro v / 04 250 Hpdi 27 T1 Work
    15" Rapid jack 1 1/2 inch below Pad
    Tourney Loaded Wot 80.6 gps
    Light 83.9 gps





  4. Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251
    #4

    Re: 202/300HPDI (TeamFATBOY)

    It,s on average its 92/93 with 93% humity! I know thats killing me. I feel like if i can get the prop to get me to around 58/5900 when it cools down some I should be there! that should take me to 60/6100? By the way are any of you gonna go to lanier for Dons benefit tourney

  5. Member
    Join Date
    Jun 2004
    Location
    Ninety Six
    Posts
    2,809
    #5

    Re: 202/300HPDI (Porkfrog)

    Replied to your IM...sent you an email.

    You can't compare your motor with Noah's. His has everything done to it that HydroTec offers. Most of the guys I know running stock 300's are between 86 and 89 on a 202. Yours sounds as if it's running pretty good for this heat. Raise it up to a 1/4" below and keep coming up till you lose WP. You also need a 15" plate.

  6. Member Fear-This's Avatar
    Join Date
    Nov 2005
    Location
    Willow Springs
    Posts
    1,549
    #6

    Re: 202/300HPDI (GE Blazer)

    Nobody said to compare to Nasteere we all know a 202 at best will run 86 may be 88 with a 300 yami if setup correctly. That's why I said IM Nasteere so he can explain what it takes to run 90+ ain't know snake oil or TXP prop gonna feed his need for speed. and yes I know your the man with all the Knowledge no disrespect I just didn't what to blow Nasteere Mods so forget the IM know ya know. good luck
    Fear-This
    2000 202 pro v / 04 250 Hpdi 27 T1 Work
    15" Rapid jack 1 1/2 inch below Pad
    Tourney Loaded Wot 80.6 gps
    Light 83.9 gps





  7. Member
    Join Date
    Jun 2004
    Location
    Ninety Six
    Posts
    2,809
    #7

    Re: 202/300HPDI (Fear-This)

    LOL...what are you talking about fear-this?? i sent him an IM and email because he asked me too. Ain't gonna feed him any snake oil either...to run in the 90's, you gotta do more than just put a prop on.

  8. Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251
    #8

    Re: 202/300HPDI (GE Blazer)

    I guess I have to get 4inch setbacks for it! see what she'll do then! I'm happy now cause speed doesn't catch fish anyway! it just allows me to fish a little longer! but it sure is nice to have it when you want it.

  9. Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251
    #9

    Re: 202/300HPDI (Fear-This)

    fear-this I don't beleave in no snake-oil anyway! I don't think GE would steer me wrong LOL. I know to go fast it cost the $$$$$$$$$ right!

  10. Member Fear-This's Avatar
    Join Date
    Nov 2005
    Location
    Willow Springs
    Posts
    1,549
    #10

    Re: 202/300HPDI (Porkfrog)

    IN your IM to Porkfrog did he ask you if he should compare his motor to Nasteere I don't think so but may be ?? what I'm talking about is your response Nobody said for him to COMPARE . all I said was IM Nasteer so he could find out what it takes for more speed that's all maybe going up a 1/4'' may do it and watch your water pressure the more I think about sounds like your dead on he may pick up a mph or too. enjoy reading all of your great information happy fishing FEAR THIS


    Modified by Fear-This at 1:10 AM 7/30/2006
    Fear-This
    2000 202 pro v / 04 250 Hpdi 27 T1 Work
    15" Rapid jack 1 1/2 inch below Pad
    Tourney Loaded Wot 80.6 gps
    Light 83.9 gps





  11. Member
    Join Date
    Nov 2005
    Location
    Prairieville, Louisiana / Zolfo Springs, Florida
    Posts
    5,696
    #11

    Re: 202/300HPDI (Porkfrog)

    Hey Porky send your lower to Titus. He can turn it into a lower water pick up and nose cone and help on your high speed runs. It will look like a sport master when he is done.

    Sorry about the porky thing!


    Modified by spider1 at 3:29 PM 7/31/2006







  12. Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251
    #12

    Re: 202/300HPDI (spider1)

    Webb, the porky thing doesn't bother me as much as knowing HELL it's true As far as my yammie it's already has L/W pickup

Similar Threads

  1. 3.3L 300HPDI?
    By 295 Pro Elite in forum Yamaha Motors
    Replies: 3
    Last Post: 06-29-2010, 02:53 PM
  2. 225-250-300hpdi ??
    By hyperflow in forum Yamaha Motors - High Performance
    Replies: 1
    Last Post: 05-27-2010, 08:11 AM
  3. F@#$ing 300HPDI!
    By spider1 in forum Yamaha Motors - High Performance
    Replies: 32
    Last Post: 03-29-2009, 04:48 PM
  4. Max RPM for 300HPDI
    By hemi375 in forum Yamaha Motors
    Replies: 4
    Last Post: 03-30-2008, 06:46 AM
  5. 201 w/300hpdi
    By slider in forum Stratos/Javelin Boats
    Replies: 8
    Last Post: 06-28-2007, 08:13 AM