We have several shipments of Blazers arriving soon so this one can go now......warranty through 2010. This one's not for a beginner! This is the B&WB article rig. Email me for all the info.
We have several shipments of Blazers arriving soon so this one can go now......warranty through 2010. This one's not for a beginner! This is the B&WB article rig. Email me for all the info.
That is one fine boat...if only I had money. I sure it'll make somebody a very happy owner.
How much and how fast will it run..
Paul Calvert
Palm Harbor Florida
2007 Blazer 210DC Pro-v w/ 2010 Mercury OptiMax 300xs
\"Saving Gas and Hauling Azz\" 89.3mph GPS
It's 30K and 85 gps completely loaded. Almost 90 w 1 man.
For curiosity...what prop? Is that the same prop used in the BWB testing?
Todd is just the motor available? Just wondering...
29 T-1. It came with a Merc 29 Tempest.......rev limiter came way too quick with the Merc.
It looks like it's already sold.......unless something goes wrong it will leave tuesday afternoon. I couldn't split the engine tho.....
Great lookin boat Todd.....................
Blair
Thanks, Todd. In the article. BWB spec'd a 29 Yamaha but did not say a T1 specifically.
Make sure the dude that buys it gets on the boards....or reports through you. We need keep tabs on the boat to get some real life numbers 1) to compare w/ BWB numbers and 2) for inforamtion to all of us who are looking at performing the mods.
Also...is the jack-plate still set the same as when Hydrotech ran the boat? If so, take a measurement for me please (prop shaft relative to pad) . They did not specificy in the BWB article.
Good deal Todd. Zeek, Wayne with Hydro Tec told me the highest they have run a HPDI on a Blazer is 1/2in. above, with most around even to a 1/4 above.
I've not changed a thing since it arrived......it was pretty we'll tweaked when HydroTec and the Craft's sent it to me. It has a nosebleed holeshot and will get from 0 to 70 very quick!
My owners 210/250 XS Opti will be in for our Blazer demo shortly. This 05 202 has been a terror here in Middle Tn.....I get calls every Monday from folks who got passed by it on saturday and sunday.
Pretty much the get in the back of the bus, bullet boy.
Pat Goff
Two degrees from center
of nowhere.
Smithwick TX.
It sold yesterday..........gonna miss it!
i saw that boat when we were down there a few weeks ago and that is one slick ride
im sure that the guy who bought it will be very happy with it
Todd,
Just curious but you mentioned that this rig has a warranty through 2010. Will Yamaha still warranty a motor that has a Hydrotec Phase-II kit installed? I would love to install a phase kit on my HPDI but figured I would be flushing the 5-year warranty down the drain as soon as I did. Thanks.
I won't say there wouldn't be any issue.....there's some common sense steps to be taken if it needs repair to be sure there's no issue with Yamaha.
Thanks for the clarification Todd. I appreciate your honesty.
Reply With Quote
![[SIGPIC][<a href=http://www.bbcboards.net/image.php?type=sigpic&userid=583&dateline=1498828542/SIGPIC] target=_blank>http://www.bbcboards.net/image.php?t...828542/SIGPIC]</a>](image.php?u=583&type=sigpic&dateline=1498828542)
