Years ago I had an issue with these cranks getting a hole on the chest and filling with water, making them useless. It appears the front hook punctures it. So I steered away from them. Buy six more last week, and the exact same issue again.
I can't think of anything I'm doing to make this happen, and I don't have the issue with any other crank. Not bashing the product, just curious if anyone else has run into this.
2004 Triton TR21, 225 proxs
I probably have over 30 Strike King Pro Series cranks and I've never had an issue with any of them.
I haven't had any issue either. I'd just put a little epoxy over the hole and fish on. I'm sure they will make it right with you though.
Dont use them, started to buy my first one a month ago unitl I saw the back of the box stated Made in China, I hung it back up on the shelf.
swell up and split down the back or belly when they get hot
It good
I wear mine out before they break or have holes open up in them..I have more problems with hole in bombers and excaliber than strike king. My only complaint with strike king is the paint wears off to quickly..
MattandAmber Lawler on Facebook
Matt Lawler HF on Facebook
matt_lawler_hf on Instagram
“Growing old is mandatory, but growing up is optional. ” ~Walt Disney.
i have 50ish in my boat now and another 70 hanging on pegboard. nvr had an issue with any of them
I haven't yet but haven't thrown alot of them lately
Lowe Stinger 175
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by spinningreel »</td></tr><tr><td class="quote">Dont use them, started to buy my first one a month ago unitl I saw the back of the box stated Made in China, I hung it back up on the shelf. </td></tr></table>
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by spinningreel »</td></tr><tr><td class="quote">Dont use them, started to buy my first one a month ago unitl I saw the back of the box stated Made in China, I hung it back up on the shelf. </td></tr></table>
What crankbaits do you use?
i had issues with some a few years ago when they couldnt turn out enough sexy shad colors but i have been thru 175-200 of them since and no more problems except the one i bash into bridge pilingschris brown at strike king took care of me with replacement baits
I'm glad no one else is having this issue. I've gone through dozens so I guess me and strike king just don't get along.
btw I've had zero issues with the KVD square bill. Just the pro series models.
2004 Triton TR21, 225 proxs
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by fishhead210 »</td></tr><tr><td class="quote">swell up and split down the back or belly when they get hot</td></tr></table>
I have this problem with redeyes, topwaters and their cranks. Even when kept indoors!!
can't afford them, so I only through Acdamey H2o Express or if on sale some Lucky crafts....
"Only the dead have seen the end of war" Plato
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Longrodder »</td></tr><tr><td class="quote">
What crankbaits do you use?</td></tr></table>
Rapala shad rap, Rapala x rap shad, Lucky Craft, Bill Norman Middle N, Little N, and some locally (E. Tenn) made balsa cranks. I cant say if any of these are Chinese, but I just happened to notice the Strike Kings last month on a trip to Bass Pro, it really stood out to me. They were in fact awesome looking baits, Im sure will nail the fish on a given time, but I just couldnt buy one, not knocking anyone else who does.
Yes i have issues with them.....They catch to many fish and make my arms hurt!!!!!!
No issues here.
I've hung some 15 to 17 lb. bass with some, and the line tie tends to bend some, small issue.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Lucky_Craft »</td></tr><tr><td class="quote">Yes i have issues with them.....They catch to many fish and make my arms hurt!!!!!!</td></tr></table>
I haven't had any issues with them yet.
Luke 22:36
Reply With Quote
