Gas/oil line size/compatible OMC hose clamp size.

[DoferGofer]

Hi BBC Techs.

I am replacing my gas/oil lines and need to know the compatible OMC hose clamp size so, I will use the the right size clamp on the right size hose.
Example: 5/32" hose = OMC Clamp #?

Regards,

[ChampioNman]

Old Fart,
Tell me how many you need of which lines and they are on there way. Let's see 9 for the oil line/VRO out to fuel tree to carb feed, 9 for the fuel line/pulse limiter, you can use a screw hose clamp on the built in tank. Tie wrap the rest at the carb bowls and fuel tree outs. I'm just going off memory and a few .

[DoferGofer]

Sounds reasonable to me. I will double check in the morning.

[SEAHORSE]

The 1/4" rubber oil line uses the #322654 Snap Clamps. If you have the smooth vinyl line that gets brittle, get rid of it.

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEAHORSE &raquo;</TD></TR><TR><TD CLASS="quote">The 1/4" rubber oil line uses the #322654 Snap Clamps. If you have the smooth vinyl line that gets brittle, get rid of it.</TD></TR></TABLE>
Thank you kind sir. . . and what size for the gas hose and 3/8" and 5/32"?

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DoferGofer &raquo;</TD></TR><TR><TD CLASS="quote">
. . . and what size for the gas hose and 3/8" and 5/32"?

</TD></TR></TABLE>

3/8" type A marine hose for inside the hull and you can use 3/8" type B for outside the hull, most often used from the primer bulb to the motor. Use only marine hose, Coast Guard approved. It will be printed every 12" with the type A or B.

[ChampioNman]

You could send him some so I don't have to get off the hip and show what a sport you really are.

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">You could send him some so I don't have to get off the hip and show what a sport you really are. </TD></TR></TABLE>
Hey young fellow, as always, I am depending on you.

I will give you a count in da moning.

[RUSTY63]

MR. Hatcher, you let me know what hose and how many clamps and we will get them on the way at NO CHARGE....We Will Bill SEAHORSE....

[SEAHORSE]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">MR. Hatcher, you let me know what hose and how many clamps and we will get them on the way at NO CHARGE....We Will Bill SEAHORSE....</TD></TR></TABLE>


Make sure that the invoice is detailed and legible so I can get reimbursed from Canadian Al.

Rusty already stated that he will cover the FedEX overnite shipping charges for you, Mr. Hatcher.

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChampioNman &raquo;</TD></TR><TR><TD CLASS="quote">Old Fart,
Tell me how many you need of which lines and they are on there way. Let's see 9 for the oil line/VRO out to fuel tree to carb feed, 9 for the fuel line/pulse limiter, you can use a screw hose clamp on the built in tank. Tie wrap the rest at the carb bowls and fuel tree outs. I'm just going off memory and a few . </TD></TR></TABLE>

Spoken like a real Champion.

Make it ten each just for good luck . . . and I am sure that Santa will visit you.

Regards,

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">MR. Hatcher, you let me know what hose and how many clamps and we will get them on the way at NO CHARGE....We Will Bill SEAHORSE.... </TD></TR></TABLE>

1. One thousand feet of 3/8" type A marine hose.

2. One thousand feet of 3/8" type B marine hose.

3. Nine hundred and eighty-five Primer bulbs.

4. Seven hundred, sixty-nine feet and 6/64th" of 1/4" oil line.

Note. Must be "ONLY MARINE HOSE", Coast Guard approved. It will be printed every 12" with the type A or B.

Regards,







Modified by DoferGofer at 3:41 PM 11/22/2006

[DoferGofer]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEAHORSE &raquo;</TD></TR><TR><TD CLASS="quote">


Make sure that the invoice is detailed and legible so I can get reimbursed from Canadian Al.

Rusty already stated that he will cover the FedEX overnite shipping charges for you, Mr. Hatcher.</TD></TR></TABLE>
Thanks SEAHORSE,

I always knew that Canadian Al. was a super guy.

Man oh man, Christmas is coming and the goose is getting fat and this is better than a penny in this old man's hat.