Results 1 to 18 of 18
  1. #1
    Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304

    Rusty, RudeTech, and CM

    Here's some Johnny's for ya....man them modded V8's sound wicked taking off, especially with those big holes in the mid...



    If you look at the 4th boat in this pic, it is one of only 9 Talons made for twin engines...and it has twin Johnny 225's on it. Sweet rig! Marie brought it all the way from Georgia!



    And here's the lonely Etec, hey I was the only Etec there and kept right up with the big dogs all weekend. It sure turned a few heads, especially when they kept going to the fuel docks and I mentioned that I ran all weekend (over 100 miles WOT!) on about 1/3 of a tank....





  2. Member
    Join Date
    Mar 2006
    Location
    Houston
    Posts
    1,422
    #2

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    Now that's a boat show!! Im bettin' the E-tec turned heads from the beginning due to the fact you don't have to wear out a starter to get em' going!

  3. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #3

    Re: Rusty, RudeTech, and CM (rudetech1)

    We had about 75 boats at the sandbar....all the locals heard about it, called their buddies, then we had like 25 airboats full of hicks watching us...I made some photo passes Fri, hopefully the pics came out! They were surprised yesterday when the lake got rough, everybody backed off, and the ol Strat just kept humpin right along across the tops of the waves. It definitely got attention and was a great conversation piece. You shoulda seen the looks on everyones faces yesterday. The line at the ramp (we had the privelage of using a private ramp) was an hour long, but moving good. After each person launched, they grouped at the pavillion right next to the ramp to watch everybody else. Their all fighting their motors, I just floated off the trailer, drifted back, propped my feet up on the console, put one arm behind my back, and hit the key while I was laughing my butt off!




  4. Member
    Join Date
    Mar 2006
    Location
    Houston
    Posts
    1,422
    #4

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    Thats the only way to launch!!!You have more time to check out the chicks at the ramp!!!

  5. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #5

    Re: Rusty, RudeTech, and CM (rudetech1)

    Um....I ain't gonna go there....let's just say the chicks I found at the party that night...um, after a lot of wasted effort...turned out to be, well, not so into guys.... But man...perfect way to spend the weekend....the party started fri am, and was still going this morning when I left to come home.




  6. Member
    Join Date
    Feb 2006
    Location
    Fairfield
    Posts
    150
    #6

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    It is sure nice to see some pictures on the board.
    [I]


    Chris Bilyard
    2009 29\'EC World Cat with twin BF225 h.p. VTEC Honda\'s
    2009 14\' Lund with BF20 Honda with electric start and power tilt
    2007 10\' 07 Merc raft with BF9.9 Honda
    [/B]

  7. Moderator
    Join Date
    Jun 2004
    Location
    Killen, AL
    Posts
    8,565
    #7

    Re: Rusty, RudeTech, and CM (chrisbil)



    Since you like to see pics, here's my E-TEC. It's not nearly as sunny or close to sand, but it's a pic.
    Jason Phillips

  8. Member
    Join Date
    Nov 2005
    Location
    Dalton
    Posts
    2,575
    #8

    Re: Rusty, RudeTech, and CM (1niceBlazer)

    1niceBlazer, your boat would look sweet behind my Blazer.






  9. Georgia Fishing Reports Moderator
    Join Date
    Jun 2004
    Location
    Springfield, GA
    Posts
    11,848
    #9

    Re: Rusty, RudeTech, and CM (Fishaholic)

    guys, guys. Who wants to see pics of boats and trucks right now?? AB was talking about chicks in bikinis that were into other chicks. Grant show us THOSE pictures.

  10. Member
    Join Date
    Nov 2005
    Location
    Dalton
    Posts
    2,575
    #10

    Re: Rusty, RudeTech, and CM (Bassin Billy)

    My Bad. Yes,........more about the girls.



  11. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #11

    Re: Rusty, RudeTech, and CM (Fishaholic)

    My dumb azz forgot to bring the charger for my camera...besides, at that point...takin pics to show you guys was the LAST thing on my mind.... Got some more pics, but they ain't johnrudes...

    Couple of our local group, Jeff Tyner's Allison, Andy Driver's Venom, Jay Smith's CC, and Capt Doug Metko in the Mirage Jaguar with Maureen the photo gal....



    Feedin some trim into the STV...



    And last, the family cruiser on roids...Yes, he does drag race that Allison family boat!





  12. Member
    Join Date
    Mar 2006
    Location
    Stanley
    Posts
    123
    #12

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    Some beautiful motors here. Hope they used sunscreen.

  13. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #13

    Re: Rusty, RudeTech, and CM (E-tecRon)

    Sweet, Thanks for sharing Grant.

  14. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,116
    #14

    Re: Rusty, RudeTech, and CM (RUSTY63)

    I'd hate to pay for the fuel right now on a V-8 I have a line on one on a Sanger, but way to much $$$. BTW we don't do hop ups here. .

  15. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #15

    Re: Rusty, RudeTech, and CM (ChampioNman)

    Ok, no hop ups...I know....Here's a stock one...whupping up on a Merc..lol





  16. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,116
    #16

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    SWEEEEEETTTT you could use some more lift!! Too much hull in the H20. . Looks like a Hydro-scream in the H20 picture with the ally on the beach.

  17. Member
    Join Date
    May 2004
    Location
    Harmony
    Posts
    9,304
    #17

    Re: Rusty, RudeTech, and CM (ChampioNman)

    Yeah, I need to start trying props...but then again in that shot I was running 76-76.5 with 50 gallons of fuel, full tackle, full cooler, and full party load. I was also running about 3/4trim in the pic, any higher and I would lose speed.....running 23-25psi of water pressure too....




  18. Member santee bass's Avatar
    Join Date
    Nov 2004
    Location
    Manning
    Posts
    4,438
    #18

    Re: Rusty, RudeTech, and CM (AwesomeBullet)

    Grant,running that much water pressure,with the right prop,you should be able to come up alot.

Similar Threads

  1. Mr. Rudetech?
    By JoshKeller in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 07-03-2006, 06:32 PM
  2. Question for Rusty/Rudetech/or anyone else
    By wardt61 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 06-14-2006, 08:50 AM
  3. rudetech 1
    By champit in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 06-12-2006, 06:04 PM
  4. RUDETECH!!!!!!!!!!
    By gollywhopper in forum Evinrude/Johnson Motors
    Replies: 9
    Last Post: 05-16-2006, 12:12 PM
  5. ChampioNman....rusty.... rudetech...oh yeah dont let me forget bassmiester
    By overdrivecb in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-28-2006, 05:53 PM