Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2010
    Location
    Springtown
    Posts
    12

    prop setup for '93 201 pro xl

    I am running a 93 201 pro xl with 200 evinrude. current prop is a 27 shooter. While trying to get on plane feels like the prop is slipping. I made some marks on the prop and shaft and lined them up. Ran it for a couple of runs and the marks will be off. looks like the inside of the prop may be slipping. Was looking for some advice on new prop for my setup. Would like to stick with the 4 blade. Care more about the hole shot the top end. i see alot of yall running the renegades or the powertech. Are these good prop and what pitch would yall recommend. Thanks....

  2. Member
    Join Date
    Oct 2007
    Location
    lehigh acres, fl
    Posts
    777
    #2
    25 renegade with a weed ring or a 26 raker.I have a 96 201 pro xl dc and have had a 200 and 225 evinrude these work the best for me.good luck.

  3. Member TightLip's Avatar
    Join Date
    Sep 2006
    Location
    Florence, SC
    Posts
    5,023
    #3
    If your prop has a press-in type hub it very well could be spun. Usually you can tell by looking at the backside of the prop.
    "I see dead people"

  4. Member Troy250's Avatar
    Join Date
    Dec 2009
    Location
    Port Neches and Toledo Bend, Tx
    Posts
    3,046
    #4
    If the marks you placed on it have moved, it appears that it is spun. I've found the 25 Renegade is a good all-around prop for my 94.
    To our troops

  5. Member
    Join Date
    May 2010
    Location
    Springtown
    Posts
    12
    #5
    Thanks for the help. Will be going with the 25 renegade.

Tags for this Thread