I just notice mine was missing. For a05 V150 TLR Email me jonsec3one@gmail.com thanks
I just notice mine was missing. For a05 V150 TLR Email me jonsec3one@gmail.com thanks
From boats.net...$24.00
http://www.boats.net/parts/det....html
Mine was gone for nearly 2 years on my former Yamaha.
I cut mine off. Those are pretty much useless on a bass boat.
I think the new secret color is "A-Rig"..........
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by SkeeterDD22 »</td></tr><tr><td class="quote">I cut mine off. Those are pretty much useless on a bass boat.</td></tr></table>
Your "frankenstein" boat is not the norm....![]()
Last three motors I have had did not have one either.
Gayle
I am too good for nothing![]()
Do you plug the hole or just leave it open, the bolt is just hanging!
Those are there for two reasons:
1) to help offset steering torque/prop torque at speed. It has to be in the water when the boat is running hard to work.
It's not in the water when a bass boat is running. IE: Useless
2) It's made out of Zinc. Helps control/reduce corrosion. BUT, for a boat that lives on a trailer....again, Useless.
I think Bobs Machine actually sells "smoothies". (zinc tab without the fin). But, I think they cost more than zinc tabs with the fin?
I think the new secret color is "A-Rig"..........
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ZX190jones »</td></tr><tr><td class="quote">Do you plug the hole or just leave it open, the bolt is just hanging!</td></tr></table>
Pull the rubber plug above the bolt. Remove the bolt. Put the rubber plug back in.
No worries.
Or, send me the diameter of the hole it needs to fit.
I'm sure I've got one. $20 shipped.
I think the new secret color is "A-Rig"..........
This is how you cure steering torque on a bass boat.
![]()
I think the new secret color is "A-Rig"..........
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ZX190jones »</td></tr><tr><td class="quote">Thanks for the info I will make a plug.</td></tr></table>
Don't use a round piece of plywood. I've got a patent on that, and I'll sue.
(same goes for styrofoam out of an old ice-chest, coffee can lid, playdough, silly putty, and/or duct tape).
I have copyrights.
I think the new secret color is "A-Rig"..........
I run a waterjet I bet I can come up with something real nice!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by SkeeterDD22 »</td></tr><tr><td class="quote">
Don't use a round piece of plywood. I've got a patent on that, and I'll sue.
(same goes for styrofoam out of an old ice-chest, coffee can lid, playdough, silly putty, and/or duct tape).
I have copyrights.</td></tr></table>
![]()
![]()
![]()