Removing Flywheel

[FastBug250]

Does anyone have the sequence for removing a flywheel from a 250 Series 2? What needs to be marked to keep timing correct?

[Wayne Worthy]

IM sent

[Stepping Up]

Wayne- Can I get that info also. Seriously thinking about doing this mod during the hot days pf July and August. I wont be fishing, might as well be modding. 1995 Yamaha ProV 200 with HT heads.

[hurricane]

One more for that info. And do you think this will have any effect on factory warranty?

[stiverp]

Sir can I also have the info on a '99 200 ox66. Also, will a flywheel of a 250 match? The part numbers appear to be the same. Thinking of just replacing it w/ the LW, but until I do get it I need to put the rig online for a tournament. Thank you. HT RULES

[macinckirk]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastBug250 &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone have the sequence for removing a flywheel from a 250 Series 2? What needs to be marked to keep timing correct?</TD></TR></TABLE>

if you still have that info can you pass it on to me, I'm thinking about doing it too but don't went to have to take the boat somewere would like to do it in my garage

[CGWright]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastBug250 &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone have the sequence for removing a flywheel from a 250 Series 2? What needs to be marked to keep timing correct?</TD></TR></TABLE>

My '06 3.3L HPDI didn't need to be re-timed. The wheel is keyed, and went right back on the way it came off.

You're gonna love the results!

[macinckirk]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CGWright &raquo;</TD></TR><TR><TD CLASS="quote">

My '06 3.3L HPDI didn't need to be re-timed. The wheel is keyed, and went right back on the way it came off.

You're gonna love the results! </TD></TR></TABLE>

[smkur50]

What's the turn a around time to have my flywhell lightened if I send it to you?

[CGWright]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smkur50 &raquo;</TD></TR><TR><TD CLASS="quote">What's the turn a around time to have my flywhell lightened if I send it to you?</TD></TR></TABLE>

I'm don't want to answer for Wayne or Matt, but I can say that I sent mine 2nd Day UPS on Monday and had it returned the same method on Friday. That's MI to MO and back.

You're already in MO, so it shouldn't take anyMO time.

[fishin fever]

can I get that info also?? I have a 2005 250 HPDI I just ordered my flywhee l

[Chevy II]

is a puller needed to remove the wheel on a 05 HPDI?

[JTD]

How much of improvement did you see on Hole shot and Top End

[fishin fever]

yes. I just did mine 2 days ago. 150lbs torque. I haven't ran it yet but I'm excited. Thanks for Wayne for all the advice.

[CGWright]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JTD &raquo;</TD></TR><TR><TD CLASS="quote">How much of improvement did you see on Hole shot and Top End</TD></TR></TABLE>

Even my wife noticed the gain in holeshot, and overall acceleration. Here's what I thought after running it.

http://www.bbcboards.net...wheel

[GotstaFish]

Can someone email this to me as well?
Karl@KaRuLures.com

Thanks and God Bless

[mullamaster]

Can I please have the info too?
Email is matthewleach15@bigpond.com

[FastBug250]

Nothing to allign or get timing off. Just undo top bolts (may need puller) and take off flywheel..it is keyed

[Fear-This]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wayne Worthy &raquo;</TD></TR><TR><TD CLASS="quote">IM sent</TD></TR></TABLE>Can I also get the info Wayne msalmon@rcomm.com and do you need a puller Tks

[CGWright]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastBug250 &raquo;</TD></TR><TR><TD CLASS="quote">Nothing to allign or get timing off. Just undo top bolts (may need puller) and take off flywheel..it is keyed</TD></TR></TABLE>

I highly recommend having a puller handy. And no, nothing tricky about this if the wheel cooperates. (thus the puller )